Home Companies Qingdao Fullwin Machinery Co., Ltd.

2200kW EPA Narrow Bucket Compact Mini Excavator Electric Drive CE 12 Mini Excavator

Qingdao Fullwin Machinery Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 2811,Building A,Guohui Financial Center,No.485 Changjiang Middle Road,Huangdao District,Qingdao City,Shandong Province

Contact name:

Inquir Now

Qingdao Fullwin Machinery Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

2200kW EPA Narrow Bucket Compact Mini Excavator Electric Drive CE 12 Mini Excavator

Country/Region china
City & Province qingdao shandong
InquireNow

Product Details

Mini Small Digger CE/EPA/EURO 5 China Wholesale Compact Mini Excavator
 
1. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
 
2. Do not lift materials with buckets.
 
3. When an abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.
 
4. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.
 
5. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.
 
6. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.
 
Specifications:

Specifications
Full Vehicle Weight4.2T
Rated Power27.0/2200kW/rpm
Swing Speed12rpm
Ground specific voltage36kPa
Stick digging force21.6kN
Overall Length5385mm
Overall Height(boom tip)1890mm
Track Width350mm
Minimum Ground Clearance350mm
Track Grounding Length1710mm
Max.Digging Height5030mm
Max.Digging Depth3390mm
Min.Rotation Radius2406mm
Bucket Capacity0.17m³
Walking Speed(Fast/Low)2.7/4.4km/h
Climbing Ability58%/30°
Bucket Digging Force23.7kN
EngineYanmar
Overall Width1750mm
Overall height(top of cab)2455mm
Wheel Base1400mm
Tail Turning Radius1561mm
Track Width2190mm
Max.Dumping Height3365mm
Max.Digging Distance5523mm

 
Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.
5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
6. Do not lift materials with buckets.
 
Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling.



 
Company Brief Introduction:
Mini Excavator, Full Energy, You will become a Big Winner!
 
Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes!
And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well.
All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated.


 


































Hot Products

Digger Mini Excavator Hydraulic Crawler Crawler Mini Excavator The Mini Excavator has a time and ...
New Hydraulic Crawler Diggers Wheel Towable Backhoe Micro Mini Excavators​ 1. Before the excavator ...
Mini Small Digger CE/EPA/EURO 5 China Wholesale Compact Mini Excavator 1. Before the operator can ...
New Excavator Mini Excavator Digging Hydraulic Small Micro Digger 1. Inspection should be carried ...
Free Shipping China Wholesale Mini Small Digger Hydraulic Ce Epa Fullwin Machinery, we support ...
Digger Excavator Mini Excavator Hydraulic Crawler Excavator Made in China Its characteristics: ...