Home Companies Marine King Miner

Scrypt Asic Miner Machine , LTC DOGECOIN Antminer L3+ 504m with psu

Marine King Miner
Active Member

Contact Us

[China] country

Address: Rom 3102, Unit 1, Building 1, 89 Cuihua Road, Gaoxin District, Chengdu, Sichuan 610096, China

Contact name:Keven

Inquir Now

Marine King Miner

Scrypt Asic Miner Machine , LTC DOGECOIN Antminer L3+ 504m with psu

Country/Region china
City & Province chengdu sichuan
InquireNow

Product Details

Bitmain Antminer L3+ 504m With PSU LTC Litecoin dogecoin Scrypt mining LTC Asic Miner Machine

 

 

Specification
 
Product Name
Antminer L3+ 504m
Algorithm
Scrypt
Hashrate
504M
Power Consumption
800W 
Top CoinLiteiocn
Size188 x 130 x 352mm
Weight4.4kg
Noise level70db
Fan(s)2
Power800W
Voltage11.6 ~ 13.0V
InterfaceEthernet
Temperature5 - 40 °C
Humidity5 - 95 %

 

About this miner

 

Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Compatible Coins: Litecoin and any other Scrypt-based coins.
Power Consumption: 800W (±10%) at the wall.
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

 

Notes:


1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin.

 

How about the Warranty?

 

For all the miners new and used If it is within the warranty period, the original factory of the miners will be responsible for it. If it is out of warranty, we will provide paid maintenance service. Normally after-Sales maintenance service of brand new miners starts from the date of delivery by the manufacture factory within 180 days.

 

The following conditions will invalidate the warranty

 

1.The mining machine itself is dismantled, and the components are changed and replaced.

2.Damage caused by lightning strikes, voltage surges, inferior power supplies, etc.

3.Ingress of water, circuit boards and components are affected by moisture and corrosion;

4.The circuit board has burnt marks or the chip is burned;

5. overclocking.

 

Hot Products

Canaan Avalon A1066 50t Avalon 1066 pro 55t Bitcoin mining BTC Asic Miner Machine #detail_decorate...
Bitmain Asic Miner Machine , Antminer L7 9.5gh 9.3gh 9.05gh 8.8gh #detail_decorate_root .magic-0...
Bitmain Antmine L3++ 580m With PSU LTC Litecoin Scrypt mining LTC dogecoin Asic Miner Machine ...
Bitmain Antminer L3+ 504m With PSU LTC Litecoin dogecoin Scrypt mining LTC Asic Miner Machine ...
Innosilicon A10 Pro 7gb 750mh , Ethereum A10 Pro ETH Miner #detail_decorate_root .magic-0{border...
Bitmain Antminer S9 S9i S9j s9k s9 se 13t 13.5t 14t 14.5t 16t with power supply bitcoin mining BTC ...