5 Gallon Bottle Filling 12 Ton Per Hour Water Purifying Machine

Descriptions of 12000LPH RO water treatment machine:
Reverse osmosis (R/O) is a water treatment process in which water is forced through a semi-permeable membrane with very small pores or "pores". The clean water passes through, leaving behind too much impurities to pass through the membrane to be washed away.
The reverse osmosis system is to compress the raw water through a precision filter, granular activated carbon filter, and activated carbon filter, and then pressurize it by a pump, using a reverse osmosis membrane with a pore size of 1/10000μm

Turn high-concentration water into low-concentration water, while mixing industrial pollutants, heavy metals, bacteria, viruses and other impurities with a large amount of mixed water to fully isolate the required physical and

The chemical indicators meet the drinking and sanitary standards, and the output of purified water is the best choice for supplementing human water quality. It is the key equipment of pure water plant.

Equipment list of 12000LPH RO water treatment machine:

Items	Name of machine	Model	Size(mm)	Qty.
1.1	Raw water pump	CHL20-20	/	1set
1.2	Quartz sand filter	SUS1200	φ1200*2700	1set
1.3	Active carbon filter	SUS1200	φ1200*2700	1set
1.4	Cartridge filter	SUS400	Φ400*1600	1set
1.5	RO unit (anti-scale dosing device included)	RO-12000	4000*600*2000	1set
1.6	Connection pipes&valves	SUS304	/	1suit
OPTION
1.7	Sodium ion exchanger	SUS1200	φ1200*2700	1set
1.8	Sodium ion rebirth device	300L	/	1suit
1.9	Ozone sterilizer	T25G	400*280*800	1set
1.10	Injector	48275	/	1set

Option 1.7 Sodium ion exchanger is based on your raw water quality, if the water hardness is high, then this filter tank is necessary.

Apply high quality SUS304, with automatic control system, piping system, includes manhole, hand hole, water distribution device on top and bottom, filter material, it is pressure model.

Main function is to use ion resin to exchange with Ca and Mg ion in the water, then reduce water hardness to avoid carbonate and sulphate generating in the water. It is the way to get soft water.

Configuration of the RO main part:

ITEM	Unit	RO-12ton	Brand
Flow rate	L/H	≥24000
Recovery rate	%	50-75
Design pressure	MPA	0.8-4.5
Dimensions	MM	4000*600*2000
High pressure pump	SET	CDLF20-10 11KW*1	NANFANG
Membrane housing material	PCS	FRP(8040-3)*4	Rework
8040 Membrane	PCS	Polyamide material*12	HYDECANME
Volume of anti-scale dosing device	Litre	PE-300L*1
Water flowmeter for salinity water	PCS	1
Water flowmeter for purified water	PCS	1
Low pressure protector for high pressure pump	PCS	1
High pressure protector for high pressure pump	PCS	1
Pressure gauge for salinity water	PCS	1
Pressure gauge for purified water	PCS	1
Conductivity meter	PCS	1
PLC	PCS	1	Mitsubishi
Program controller (errors alarm)	PCS	1
Air switch	Suit	1	Schneider
Contactor	Suit	1	Schneider
Relay	Suit	1	Schneider

1). The system can continuously produce water and is highly automated.

2). No need to regenerate chemicals, easy to operate and maintain.

3). The core component of ro system is imported American DOW membrane.

4). Automatically open when the water level is low, close automatically when the water level is high

5). The system automatically flushes the reverse osmosis membrane to reduce the rate of membrane fouling

6). Multi-stage pump water shortage protection

7). Product conductivity meter can continuously monitor water quality online.

8). Low operating cost and long life

9). There is a reverse osmosis controller to make the entire reverse osmosis system run automatically.

10). Easy to control and maintain.

11). Automatic washing film

12). Environmental protection, low power consumption

13) Automatic flushing/back flushing

14) Low pressure/high pressure protection