Closed system High safety and reliability Ultra-fine powder mill
Ultra-fine powder mill is suitable for the super fine grinding of
all kinds of crisp materials whose Moh's hardness is blow 7, such
as calcium carbonate, barite, dolomite, calcite, limestone, kaolin,
bentonite, marble, gypsum, quartz, feldspar, alay, talc, fluorite,
white mud, mica, refractory material, glass, total about 100 kinds
of materials.
Working Principle
When the grinding mill is at work, the main bearing and each dial
are driven by electromotor through reducer, and all the grinding
rollers are rolling in the ring channels driving by dial through
plunger. The materials are driven to the edge of the turn plate by
the centrifugal force and fall down into the grinding chambers. The
high-pressure air blower constantly inhales air, airflow with
crushed materials are brought to classifier whose high-speed
impeller will screen the airflow: The unqualified particle size
will fall and return to the mill for being reground while the
qualified particle size mixed with air will go into the cyclone
powder collector. Most of the qualified powders will fall and exit
from the discharging valve at the bottom; A small proportion of the
fine powders, with airflow, moves to the dust cleaner. The
materials from the above two lots are sent by the conveyor to get
finished powders packed. In addition, filtered clean air will be
emitted from muffler in the end.
Advantages of Ultra-fine powder mill
1.The yield is 40% higher than other mills.
2.High utilization rate of Wear material:2-5years.
3.Adjustable particle size:325-3000mesh.
4.High safety and reliability. The design of the mill is rigorous,
so no screw loosening to damage the machine.
5.Closed system, so it is the green and ideal equipment for
environment protection.
Technology Data of Ultra-fine powder mill
Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680 |
Ring Diameter(mm) | 800 | 900 | 1000 | 1250 | 1680 |
Ring Number (PCS) | 3 | 3-4 | 4 | 4 | 4 |
Roller Number(PCS) | 18-21 | 24-29 | 28-36 | 30-44 | 30-40 |
Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 135-155 | 120-130 |
Input Size (mm) | ≤10 | ≤10 | ≤15 | ≤15 | ≤20 |
Finished Size (um/mesh) | 74-5 (200-2500) | 74-5 (200-2500) | 74-5 (200-2500) | 100-6 (150-2000) | 100-9 (150-1500) |
Capacity (t/h) | 0.4-4.5 | 0.6-6.5 | 1-9 | 2-16 | 3.8-30 |
Outlet Size L*W*H (m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |