Cone Crusher G6.3 1600mm OD Round Belt Pulley Flywheel Mining Machine Spare Parts

Flywheel:

The flywheel of compound cone crusher is generally equipped with two flywheels, symmetrical arrangement, one of which doubles as a belt wheel. In the small crusher, there are also the use of a flywheel (and belt pulley); Technical personnel in the design of flywheel, generally first given a diameter, and then according to the moment of inertia to determine the flywheel mass. For cast iron flywheels, the circumferential speed shall not be greater than 30m/s.

Flywheel is a wheel-shaped accumulator with a large moment of inertia mounted on the rotating shaft of a machine. When the machine speed increases, the kinetic energy of the flywheel increases, storing energy; When the machine speed decreases, the flywheel kinetic energy decreases, releasing energy. Flywheels can be used to reduce speed fluctuations during mechanical operation.

Flywheel main function:

The flywheel is a large disc-shaped part of the engine mounted on the back end of the crankshaft. It has a large moment of inertia and has the following functions:

(1) Part of the energy of the engine working stroke is stored to overcome the resistance of other strokes and make the crankshaft rotate evenly.

(2) Through the clutch installed on the flywheel, the engine and the automobile transmission system is connected.

(3) Equipped with a gear ring engaged with the starter, easy to start the engine.