Jiangyin Baoli Machinery Manufacturing Co., Ltd. |
Verified Suppliers
|
|
1000L Horizontal Dry Powder Ribbon Mixer Ribbon Type Horizontal Mixer
Features and advantages description:
1. Convenient cleaning: It can be used to clean and clean the
inside of the equipment in a timely, convenient and fast manner for
each batch and shift without leaving dead ends.
2. High mixing uniformity: It can mix materials with a ratio of
1:10000 evenly, especially for materials with larger specific
gravity characteristics. Users have done
In the field test, 1000 kilograms of flour and 5 kilograms of red
powder were mixed within 10 minutes. After sampling and testing
from every corner, the mixing uniformity was very high.
Compared with other mixers, the mixing uniformity is much higher!
3. The mixing speed is fast and the efficiency is high: usually,
each batch of materials is mixed and fully mixed in 1-10 minutes,
which is 6-10 times more efficient than other mixers.
Or higher.
4. Fast and convenient discharging: usually finish a batch of
materials in 1 to 2 minutes. During the user's field test, the
output time of 1,000 kg of flour was 47 seconds.
5. Large loading capacity: The equipment usually has a loading
capacity (loading factor) above 70%.
6. Low residual volume: Users always think that horizontal
equipment has large residual volume, but this is not the case. Due
to the gap between the outer screw belt and the U-shaped cylinder
wall, we do it during the processing
It is very small, and the spiral belt is always running when the
material is discharged, which makes the material move toward the
discharge valve, and almost all the light is emitted. Users in the
field test
Catty flour remains in 5 kg.
7. Satisfy vacuum feeding and dust-free discharging, and avoid dust
flying during the whole feeding, mixing and discharging process.
8. The mixing process is gentle, and the original state of the
material is basically not destroyed.
9. No pollution to materials: The stirring mechanism of the
equipment is integral, safe and reliable, all corner welds are
smoothly transitioned and easy to clean; the lubrication parts are
located
Outside the barrel, no oil drips and abrasive debris can penetrate
into the material, and can be operated in a sealed manner to
prevent dust in the air from entering the material.
10. Low requirements for the workshop: the equipment is horizontal,
and various types of driving devices and discharge positions can be
selected arbitrarily, without being restricted by the height of the
workshop and the floor space.
11. The equipment runs smoothly and reliably, with few wearing
parts, long service life, convenient maintenance and simple
operation.
Technical Parameters
Model | JB-300 | JB-500 | JB-1000 | JB1500 | JB-2000 | JB3000 | JB-4000 | JB6000 | JB-8000 | JB-10000 |
Barrel volume(L) | 300 | 500 | 1000 | 1500 | 2000 | 3000 | 4000 | 6000 | 8000 | 10000 |
Loading volume(L) | 100-180 | 200-300 | 400-600 | 600-900 | 800-12000 | 1200-1800 | 1600-2400 | 2400-3600 | 3200-4800 | 4000-6000 |
Mixing time (Min) | 8-20 | 8-20 | 8-20 | 8-20 | 8-20
| 8-20 | 8-20 | 8-20 | 8-20 | 8-20 |
Blender Motor (KW) | 3-5.5 | 4-11 | 7.5-15 | 11-18.5 | 18.5-30 | 18.5-30 | 22-37 | 37-55 | 37-55 | 45-75 |
Weight kg | 510 | 920 | 1450 | 1950 | 3160 | 3300 | 3620 | 5400 | 6880 | 7900 |
Material | SS304 | SS304 | SS304 | SS304 | SS304 | SS304 | SS304 | SS304 | SS304 | SS304 |
Detail Pictures
Our service