Tri Proof Light IP20 Microwave Motion Sensor With Linear Design

Tri Proof Light IP20 Microwave Motion Sensor With Linear Design

Tri-proof light microwave sensor with liner design-HD02V 1,1-10V dimming and mesh networking

Features:

• Linear design sensor with operating voltage of 220-240V for tri-proof and linear light.
• With 12 DIP switch keys, it provides more options for the Hold time, Detection area, Stand-by period, Stand-by dimming level and Daylight threshold.
• Turn off the light or dim the light to a lower brightness like 10%, 20% and the like when no movement to save energy and play a role of sustainability.
• Smartly turn on the light to be 100% brightness when detect the movement with an insufficient daylight.
• 7 pole pluggable clamp terminal((L,N,N,L’, 1-10V+,1-10V-, SYNC) for 0.75-1.5mm² cable.
• With the function of SYNC, the sensor could be connected with other sensors in one group which make all light in this group will work synchronously like an mesh networking
• Different options of detection range like 10%, 50%, 75%, 100% to shorten the detection area which could be widely used in parking lot to avoid false trigger.
• With rod antenna, the module is super compact to be easily installed inside of tri-proof and linear light with a very small hole.
• IP20 and 5 years of warranty.
• Certificate of CE/RoHs

Specifications:

    ON/OFF            Daylight sensor        Detection area           Hold time          Warranty 5 years

stand-by period     stand-by dimming 

                                      level

Dimensions:

• With the slim structure and width of only 32.4mm , it’s specially designed for Tri-proof and linear light with built-in installation method.
• With two installation hole, it could be tightly fixed on the light structure with screw.
• It could be also installed with module only without any housing to save space.

Wiring Diagram:

With the terminal of SYNC, several sensors could be connected with each other in one group. it could keep all of the light being connected in the same group to be synchronous which means all of the light will keep the same status all the time.

Dip switching settings: 

Detection area        Hold-time        Daylight threshold   Stand-by period          Stand-by dimming level

In this area,          The period of    Definition of the        the period of light        The                                                          

movement will     light keeping    ambient brightness;    keeping low output      definition of

be detected        100% brightness  only when the           before it's completely    low output

and able to          after moving      ambient brightness    switched off.when it's   in the 

trigger the           objects levea     is lower than the        preset as"∞",the light    stand-by period.

sensor. 100%       the detection     preset specific           always keep at low

detection area      area.                 lux amount,the          output if no movement

is also known                               sensor will work;        in the detection area

as the strong                                when it's preset          and doesn't turn OFF.

sensitivity.                                   as"disable",the 

                                                    sensor works 

                                                    everytime it

                                                    detects motion 

                                                    regardless the

                                                ambient brightness.

Detection Area (Sensitivity)

Hold Time

Daylight Threshold

*Disable means the daylight sensor does not work.

The sensor will turn on light once motion is detected regardless of ambient light level.

Stand-by Period

Stand-by dimming level

Application Demo - Function Demo-On/off control:

     With sufficient daylight,                With insufficient daylight,                 After the last detection   

     even when motion                        when motion detected,                     and the present hold

     detected, light remains                 light ON.                                          time elapsed, light OFF.

After the stand-by period,light OFF.