Active Member
|
[China]
Address: 1101, floor 11, block C, Hengbo lirongfeng Industrial Park, Xuegang North Road, Qinghu community, Longhua street, Longhua District, Shenzhen
Contact name:Blake.Wu
Shenzhen Gestton Industrial Co., LTD |
|
|
4 UHF wireless receivers to one set of antenna TS1000 UHF Microphone Antenna System
Professional Wireless Microphone TS1000 UHF Microphone Antenna System
Features:
Ultra-wide band 470-1000 MHz
Compatible with up to 4 UHF wireless receivers to one set of antenna
Adopts the latest wide dynamic range and low noise component.
Advanced circuit design featuring very low inter-modulation distortion and eliminates the spurious interference.
BNC antenna connecters.
Allows daisy-chain antenna dividers for more receivers.
Receiver Parameter
| Main Frame Size | EIA-Standard 19" 1 U |
| Frequency Range | UHF 470--1000 MHz |
| Output Gain | 1 dB ± 1 dB |
| IIP3 | +14 dBm |
| Noise Figure | < 2 dB |
| Impedance | 50Ω |
| Connector | BNC |
| Antenna Power Supply | 12V / 150 mA DC |
| Output Power Supply | Each Channel: 12V / 1000 mA DC |
| Power Supply | 110-240V AC 50/60 Hz |
| Dimensions (mm) | 483 (W) x 45 (H) x 213 (D) |
| Weight | 2.25KG |
Application
TS-1000 is a professional wireless microphone antenna system,
Ideally suitable for small scale boardrooms and meeting rooms, Large Meeting Room, Large lecture seminar
Note the installation position. The antenna amplifier is usually composed of an amplification part and a power supply part. When the antenna feeder is short (generally refers to the use of indoor antenna), the antenna amplifier can be placed next to the TV; When the antenna is erected high and the feeder is long, the two parts shall be placed separately. After the amplification part is sealed by the waterproof box, it is best to install it at the end of the support rod 1 ~ 1.5m away from the antenna vibrator, and the power supply part can be placed near the TV, which can improve the signal-to-noise ratio of the TV signal.
