|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
This is a NEMA 17 hybrid stepper motor with planetary gearbox. Also comes with an encoder.
Available in different gear ratios from 3.71:1 to 719.98
The length of the gearbox is 32.2mm~57mm, which is related to the gear position.
Shaft type and shaft length can be customized.
Motor torque = raw torque * gear ratio * gearbox efficiency
Motor speed = original speed / gear ratio
| Product Name | Geared stepper motor |
| Model | 35mm hybrid motor(NEMA 14) |
| Gearbox type | 35mm hybrid stepper motor |
| NO.OF PHASES | 2 phase |
| STEP ANGLE | 1.8°/133 |
| Gear ratio | 133:1 |
| COIL RESISTANCE | 8.8Ω±10%/phase |
| Output speed | about 10 RPM |
| Output torque | 10KG*cm |
| Phase current | 0.8A/phase |
Gearbox parameters:
| Levels | Efficiency | Gearbox length(mm) | Optional gear ratio |
| 1 | 90% | 32.2 | 3.71/5.18 |
| 2 | 80% | 40 | 13.76/19.22/26.83 |
| 3 | 72% | 50 | 51.06/71.30/99.55/138.99 |
| 4 | 57% | 57 | 189.45/264.52/ 369.32/516.66/719.98 |
Type of Wire Connect
Motor input method with Pin type,FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Out shaft standard as follows,also can customerized due to the user drawings
welcome to contact customer service for more types
Round Type : DIA3mm. 4mm. 5mm
D-cut Type: DIA3-D2.5 DIA4-D3 etc
Screw Type: M3 M4 M5 Serial
Trape Type
I-cut Type: DIA3-I2 DIA4-I3
Other Type: Shaft with a hole etc
The regular models are shown in the figure, and the special sizes can be customized.
Samples are packed with foam sponge inside paper box.
For mass production, products are packed in paper carton.
For sea shipping (Mass production), cartons are packed on pallet.
By express(DHL/ UPS/ Fedex/ TNT): 5~12 days
By 4PX express: 10~20 days
Sea shipping: 40~60 days (depends on different countries)
1.Are you a manufacturer or a trader?
We are the manufacturer. We manufacture the motors ourselves.
2.Where is your factory? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. If you would like to visit our factory, please feel free to visit us.
3.Do you provide customized samples/free samples?
We can customize the sample, but need additional customization cost.
No, we do not provide free samples.
4.What is the lead time for samples?
For stock samples, delivery time is 3 days.
For samples that are not in stock, the lead time is about 15 days.
For customized samples, the lead time is about 25 to 30 days.
5. What custom service do you provide?
We have a development team with over 20 years of experience.
We can provide customers with customized services for various motor parts.
From the design of the slider, lead screw and gear box of the motor.
Cable length, connector type and FPC design.
6.If we want to develop a new product, can we sign an NDA contract?
Yes, we can sign an NDA contract with you and protect your confidentiality.
If you have a new project to develop, please feel free to contact us.
