|
[China]
Trade Verify
Address: ROOM 107, 1ST FLOOR, No. 602 GUANGSHAN ER ROAD, TIANHE DISTRICT, GUANGZHOU, CHINA POSTCODE: 510663
Contact name:John Shen
Guangzhou GENY Electric Co., Ltd |
|
Verified Suppliers
|
|
|
| Test Voltage (Full Wave & Fundamental Wave) | |
| Range | 0~500V |
| Error | ±0.05% (0.1%) |
| Harmonic | 2nd ~ 51st |
| Test Current (Full Wave & Fundamental Wave) | |
| Range (direct connection) | 0.025A ~ 12A (Ie=5A) |
| Range (100AClamp CT) | 0.5~120A (Ie=100A,usage range=0.01Ie~2.4Ie) (Optional: Ie=5A, 500A, 1000A) |
| Error (direct connection) | ±0.05% (0.1%) |
| Error (100AClamp CT) | ±0.2%(5A,100A) ±0.5% (other) |
| Harmonic | 2nd ~ 51st |
| Starting current | 0.05%Ie |
| Power Measure Error (Full Wave & Fundamental Wave) | |
| Active Power (Direct connection) | ±0.05% |
| Active Power (100A ClampCT) | ±0.2%(5A,100A) ±0.5% (other) |
| Reactive Power (Direct connection) | ±0.1% |
| Reactive Power (100A ClampCT) | ±0.5%(5A,100A) ±1.0% (other) |
| Energy Measure Error (Full Wave & Fundamental Wave) | |||
| Active Energy (Direct connection) | ±0.05% (±0.1%) | ||
| Active Energy (100A ClampCT) | ±0.2%(5A,100A) ±0.5% (other) | ||
| Reactive Energy (Direct connection) | ±0.1% | ||
| Reactive Energy (100A ClampCT) | ±0.5%(5A,100A) ±1.0% (other) | ||
| Error (Harmonic Wave) | |||
| Direct Connection | kWh,U, I, P, Q, S | ±0.2%H (H=1+0.01k, k=2~51) | |
Clamp CT 5A/100A | kWh,U, I, P, Q, S | ±0.5%H (H=1+0.01k, k=2~51) | |
| Cycle Output Current for 5A CCT’s Self Calibration | 0.05A,0.1A,0.25A,0.5A,1A,2.5A,5A | ||
Error of 5ACCT’s Self Calibration (linear and phase error) | ±0.1% | ||
| Clamp CT 500A/1000A | kWh,U, I, P, Q, S | ±1.0%H (H=1+0.01k, k=2~51) | |
| Error - Others | |||
| Ratio Measurement | ±0.5% | ||
| Voltage Influence | <±0.01% | ||
| Frequency Influence | <±0.01% | ||
| Temperature Influence | <±0.01%/℃ | ||
| 24h Accuracy Influence | <±0.01% | ||
| Harmonic Influence | <±0.01% | ||
| Phase angle | |||
| Range | - 180°~ 180° | ||
| Error | <±0.1° | ||
| Frequency | |||
| Range | 45 ~ 65Hz | ||
| Error | ±0.01Hz | ||
| Pulse output | |||
| Inner High frequency (CH) | Direct connection | 1.8x109 P/kWh | |
| Clamp CT | 1.8x109 *(5/Ie)P/kWh | ||
| Low frequency output | Direct connection | 3600P, 36000P, 360000P/kWh(kvarh, kVAh) | |
| Clamp CT | 3600P, 36000P, 360000P *(5/Ie)P/kWh(kvarh, kVAh) | ||
| Pulse ratio | 1:1 | ||
| Output level | +5V (can be adjusted according to request) | ||
| Pulse input | |||
| Input Channel | 2 | ||
| Input level | 5 ~ 10V | ||
| Max Pulse Input frequency | Max. 10kHz | ||
| Display | |||
| Resolution | 7’’TFT Touch Screen | ||
| System | Windows CE | ||
| Other | |||
| Voltage supply mode | External power, Tested circuit, Battery | ||
| Working power supply | AC 55~600V | ||
| Voltage Withstand | 4.0kV (voltage ¤t terminals, power supply & low voltage terminals) | ||
| EFT(Electrical Fast Transient) | 2.0kV | ||
| IP Level | IP51 | ||
| Surge | 2.0kV (common mode), 2.0kV (different mode) | ||
| Power on Stability Time | < 3mins | ||
| Chargeable battery | 11.1V 3000mAh | ||
| Power Consumption | <9W | ||
| Operation Temperature | Temperature -20℃ ~ +55℃, humidity 40% ~ 95% | ||
| Storage Temperature | Temperature -40℃ ~ +80℃, humidity 40% ~ 95% | ||
| Dimension (mm) (W×H×D) | Main | 245×150×50 | |
| Carry case | 425×336×196 | ||
| Weight (kg) | Main | 2 | |
| Whole set | 10 | ||
