TP310S Mild Carbon Steel Pipe , 0Cr13 / 1Cr13 / 2Cr13 Seamless Stainless Steel Tubing

TP310S Mild Carbon Steel Pipe describe

TP310S mild carbon steel pipe refers to a pipe made from mild carbon steel grade TP310S. Here's a description of TP310S mild carbon steel pipe:

1. Material: Mild Carbon Steel Grade TP310S

   • TP310S is a specific grade of mild carbon steel that contains low levels of carbon along with additional alloying elements such as chromium (Cr), nickel (Ni), and other elements. TP310S is a stainless steel grade that offers good corrosion resistance, high-temperature strength, and excellent weldability.

2. Pipe Construction

   • The pipe is manufactured using standard pipe manufacturing methods, which may include either a seamless or welded construction. Seamless pipes are produced by piercing a solid billet of carbon steel, while welded pipes are formed by joining or welding two or more steel plates or coils together. The construction method may vary based on the manufacturer and the specific requirements of the application.

3. Mild Carbon Steel Properties

   • TP310S mild carbon steel pipes offer a balance of strength, ductility, and corrosion resistance. Mild carbon steel refers to low-carbon steel that contains a relatively low percentage of carbon, typically below 0.3%. This carbon content provides adequate strength while maintaining good weldability and formability.

4. TP310S Grade

   • TP310S is a stainless steel grade known for its high-temperature strength and excellent corrosion resistance. It contains higher levels of chromium and nickel, which contribute to its superior resistance to oxidation, scaling, and corrosion in high-temperature environments. TP310S is often used in applications where elevated temperatures and corrosive environments are present, such as in heat exchangers, furnaces, and chemical processing.

5. Applications

   • TP310S mild carbon steel pipes find applications in various industries, including petrochemical, oil and gas, power generation, chemical processing, and refineries. They are commonly used for conveying fluids, gases, or as structural components in systems that require resistance to high temperatures and corrosive environments. TP310S pipes are suitable for both internal and external applications, depending on the specific requirements.

It's important to note that the specific dimensions, tolerances, and properties of TP310S mild carbon steel pipes may vary depending on the manufacturer and the specific requirements of the application. It's recommended to consult the relevant specifications or the manufacturer's documentation for detailed information on the specific characteristics and applications of these pipes.

Carbon Steel in the Automotive Industry

1. Carbon steel for automobile industry

Carbon steel is one of the most important materials used in the automotive industry. It is widely used in the manufacture of bodywork, engines and other components. The main reasons for its widespread use are its good strength-to-weight ratio, high durability, and low cost.

In recent years, however, the use of carbon steel in cars has been declining due to the increasing use of lighter-weight materials such as aluminum and plastics. The trend is likely to continue as automakers seek to reduce vehicle weight to improve fuel efficiency and emissions levels.

What are the advantages of high -carbon steel?

1.High -carbon steel heat treatment can obtain high hardness (HRC60 1: 65) and better abrasion resistance.

2.High -carbon steel has better cutability.

3.The raw materials are easy to obtain, and the production cost is low.

What are the disadvantages of high -carbon steel?

1. It has poor thermal hardness. When the operating temperature of the tool is greater than 200 ° C, its hardness and abrasion resistance will decrease.

2. It has low quenchtability.

The difference between high -carbon steel and low -carbon steel is as follows:

1. Differences of toughness: Low -carbon steel annealing tissue is iron and small amount of pearl light. Its strength and hardness are low, and the plasticity and toughness are better. Therefore, its cold formability is good. High -carbon steel has a high strength and hardness, high elasticity and fatigue limit after proper heat treatment or cold pull -out hardening, and the cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor.
2. Application differences: Low -carbon steel has good welding. Carbon content from 0.10%to 0.30%Low -carbon steel is easy to receive various processing such as forging, welding and cutting, and is often used for manufacturing chains, rivets, bolts, shafts, etc. High -carbon steel is mainly used to make spring and wear -resistant parts. Carbon tool steel is a high -carbon steel that basically does not add alloy elements. It is also a steel species with low cost, good hot and cold processing, and wide range of use of tool steel.
3. Different carbon content: Low -carbon steel is carbon steel with carbon content below 0.25%. Its strength and hardness are low, and plasticity and toughness are better. 1.70%, the strength and hardness of bribery, high elasticity and fatigue limit, cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor.

Carbon Steel Tube parameter

chemical composition

mechanical properties

Our advantage

Product Inventory

Jiangsu Jinruiheng uses standard export transportation packaging, according to the size of the stainless steel plate binding steel belt. According to our shipping experience, a 20-foot container can hold 22 tons of stainless steel, and a 40-foot container can hold 25 tons of stainless steel. For larger orders, we ship by bulk carrier, which is cheaper. Packaging can also be customized according to customer needs.

Packing and Shipping:

DELIVERY SERVICE COMMITMENT:

The goods shall be delivered in strict accordance with the contract, and the consignee shall be notified within 48 hours after thegoods are delvered: Loading shall be carried out in strict accordance with the requlations. without overloading, bias and weiahtgathering