|
[China]
Trade Verify
Address: ADD: Room 121-123, Building 15, No. 289, Fangcheng Avenue, Xinwu District, Wuxi, Jiangsu, China
Contact name:Fan
Wuxi Baoneng Stainless Steel Co., Ltd. |
|
Verified Suppliers
|
|
|
410S stainless steel angle bar
Type 410S is a low-carbon, non-hardening ferritic stainless steel.
The low carbon and a small alloy addition minimize austenite
formation at high temperatures which restricts the alloys ability
to harden. 410S remains soft and ductile even when rapidly cooled
from above the critical temperature. This non-hardening
characteristic helps prevent cracking when the alloy is exposed to
high temperatures or welded. 410S is completely ferritic in the
annealed condition. It exhibits adequate corrosion resistance
similar to 410 and good oxidation resistance.The ability to cool
from elevated temperatures without hardening makes type 410S suited
to applications such as annealing boxes, quenching racks,
oxidation-resistant partitions and other high-temperature units.
APPLICATIONS
Petroleum refining and petrochemical processing, columns,
distillation trays, heat exchangers, towers, ore processing, mining
machinery, thermal processing, annealing boxes, partitions,
quenching racks, gate valves, press plates
ElementType 410S (Wt.%)
Carbon: 0.08 max
Manganese: 1.00 max.
Phosphorus: 0.040 max.
Sulfur: 0.030 max.
Silicon: 1.00 max.
Chromium: 11.50-13.50
Nickel: 0.60 max
Titanium: 0.20 max
Element (Wt.%)
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | Titanium |
| 0.08max | 1.00max | 0.040max | 0.030max | 1.00max | 11.50-13.50 | 0.60max | 0.20max |
Surface Treatment
| Surface Treatment | Definition | Application |
| NO.1 | A hot - rolled piece whose surface has been treated by heat treatment, pickling or the corresponding process | Chemical Tanks, Pipes, Chemical Industry Equipment etc. |
| 2B | After cold rolling, heat treatment, pickling or other equivalent treatment, the final cold rolling to give appropriate luster | Medical Equipment, Food Industry, Construction Material, Kitchen Utensils etc. |
| BA | After cold rolling, bright heat treatment is given | Kitchen Utensils, Electric Equipment, Building Construction etc. |
| NO.4 | Products polished with abrasives 150 to 180 as specified in JIS R6001 | Kitchen Utensils, Building Construction, Medical Equipment etc. |
| HL | After polishing, use the appropriate abrasive size to form a continuous polishing streak | Building Construction etc. |
| 8K | A mirror-like reflective surface given by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior and exterior decoration etc. |
FAQ
Q1:What product information must I provide before making a purchase?
