Active Member
|
[China]
Address: CANGZHOU, HEBEI, CHINA
Contact name:Linda
DLY Metal Roofing Machine |
|
|
Metal Roofing 1250mm 15kw Trapezoidal Roll Forming Machine With
Hydraulic Cutting
1. Brief introduction of Trapezoidal Roll Forming Machine
The Trapezoidal panel roll forming machine is an important type of
equipment for the construction industry. The sheets product by
Trapezoidal panel roll forming machine are used to create roof and
wall panels. They are easy to operate and can be used in a variety
of industries.
One of the most common uses for the trapezoidal roofing sheet
making machine is in the manufacturing of metal roofing sheets.
These panels are in various profiles. There are low-profile
trapezoid panels, which are commonly used for IDT roofing, and
high-profile trapezoidal roof panels, which are commonly used for
load-bearing structures.
Trapezoidal roofing make machine is an important type of metal
building material manufacturing equipment. It can be used for the
manufacturing of trapezoidal roof panels without ribs. These roof
panels are made with low-cost cold metal PPGI coils. This type of
roofing sheet is very popular in the United States and African
markets. The PBR and R-Panel roofing sheets are only available in
American and European markets.
2. Description of Trapezoidal Roll Forming Machine
No. | Steel metal roof trapezoidal and corrugated iron roofing sheet tile
making roll forming machine | |
1 | Suitable to process | Color alu-zinc steel coil |
2 | Roller | 18Rows |
3 | Dimensions | 9*1.55*1.8m |
4 | Motor Power | 4Kw |
5 | Pump Station Motor | 4Kw.Lichao Brand |
6 | Thickness of the plate | 0.3-0.8mm |
7 | Productivity | 10-15m/min |
8 | Material of the cutting blade | Cr12,Quenched treatment 58℃-60℃ |
9 | Diameter of the roller | Φ70mm |
10 | Weight | About 4500kgs |
11 | Main structure of the machine | 350H beams |
12 | Processing precision | Within 1.0mm |
13 | Side panel of machine | 16mm |
14 | Chain Wheel and Cycle Chain | 1 Inch |
15 | Voltage | 380V 50Hz 3phases or as customer's need |
16 | Control system | PLC control (Delta) |
17 | Frequency system | Delta |
18 | Drive mode | Motor driver |
19 | Touch screen | Delta |
20 | Rolling materials | 45# forging steel with chromium plate |
21 | Length Tolerance | ±2mm |
4. Detail photos of Trapezoidal Roll Forming Machine
