Active Member
|
[China]
Address: Block 1, Beihuayuanjie, Chaoyang, Beijing 100024, China; market@sinosteelengineering.com
Contact name:
BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD. |
|
|
Copper mould plate for flat products larger size narrow size slab
Mould Inside Wall Plating
Chrome plating is furnished to the inside wall of copper mould so as to increase the wear resistance and improve the service life.
Mould Quality Control
From material, every manufacturing step to final inspection, BEIJING SINO STEEL provides full quality control to our copper mould tubes according to ISO9001 system.
Mould Repair
In certain cases copper mould tubes can be repaired with specialized service from BEIJING SINO STEEL. Repaired tube can achieve nearly the same working life as new one.
Mould Assembly
BEIJING SINO STEEL is engaging in deign and manufacturing of tubular mould assemblies including square, rectangular and round types.
Service
--Special design for your mould and mould assembly according to actual working condition, resulting in high speed and high efficiency casting.
--Technical service on request, such as training, field service etc.
--Recommendations concerning problem-solution of casting operation.
| Name | Ltem | Camber radius | Thickness | Length | Remarks |
| Size(mm) | |||||
| Square & Rectangular copper tuble | Square 50*50-500*500 Rectangiar (100-500)*650 | 4000-17000 Also straight | 6-50 | 700-1000 | With slot Single taper ,double taper,triple taper,quadruplicate taper,parabolic taper and various kinds of continuous taper high efficiency copper mould tubes |
| , |
| Round copper tuble | Φ110-Φ1200 | 5000-17000 Also straight | 10-50 | 700-1000 | With slot double taper,quadruplicate taper,parabolic taper and varius kinds of continuous taper high efficiency copper mould tubes |
| Non-standard copper mould tubes Beam Blank copper mould tubes | 6000-17000 | 12-50 | 780-1016 | With slot Single taper,double taper,triple taper,quadruplicate taper |
| Copper Plate Size | Spccifieations | Matcrial | Coating | ||
| length | width | thickness | |||
| Beam Blank | 700-1016 | 280-480 | 80-140 | CuCrZr,CuAg | Ni_Co,Ni_Fe |
| Rectangulur Blank | 700-1000 | 300-3800 | 30-65 | CuCrZr,CuAg | Ni_Co,Ni_Fe |
1.Product Scope:
| Material | CuAg, Cu-Cr-Zr |
| Design | H-beam |
| Rectangular | |
| Size | H-beam: 700-1016x280-1000 (LxW) Wall thickness:35-310mm
Rectangular:Max 5000mm×3800mm (L x W) Wall thickness:30-75mm |
| Coating | Coating material: Cr, Ni-Co or Ni-Fe |
| ltem | Temp | Unit | Material | ||
| CuDHP | CuAg0.1 | CuCrZr | |||
| Chemical Composition | |||||
Cu 99.85 P0.015-0.040 | Cu 99.50 Ag0.08-0.12 | Cu 98 Cr 0.30-1.20 Zr 0.08-0.30 | |||
| Physical properties | |||||
| Electical conductivity | 20 | %IACS | 85 | 95 | 80 |
| Thermal conductivity | 20 | W/(m.K) | 340 | 375 | 330 |
| Coefficient of thermal expansion | 20-300 | 10^-6/K | 17.1 | 17.1 | 17.2 |
| Recrystallisation temperature | ℃ | 345 | 360 | 690 | |
| Modulus of elasticity | 20 | 10^3MPa | 120 | 123 | 126 |
| Melting point | ℃ | 1083 | 1083 | 1078 | |
| Specific gravity | g/cm3 | 8.9 | 8.9 | 8.9 | |
