Electrode Clamping block and contact For EAF, LF, RF arc furnace

Electric Arc Furnace contacting block pad electrode clamping unit

• Application:

This product found its application in the following industries

1. Steel Plants ( EAF, LF Etc.)
2. Ferro Alloy Plants
3. Calcium carbide Plants
4. Furnace manufacturers etc.

• DESIGN CRITERIA:

HIGH RELIABILITY, MINIMIZE EXISTING MODIFICATION, OPTIMIZE ENERGY SAVING.

• NUMBER of EACH ELECTRODE ARM: 1 SET (PHASE 1,2,3,)

• EACH ELECTRODE ARM TYPE:

Water Cooled Rectangular Box Type

: Steel Plate Inside And Copper Plate Outside.

These Plate Are Welded Together By A Special "Explosion" Welding Process.

• BODY COMPLETE WITH:

- Copper Plates For Connecting The Water-Cooled Power Cables.

- Copper Heads For Connecting The Contact Plate Of The Electrode Clamp.

- Connections For Cooling Water And Hydraulic Fluid For Clamp Opening Cylinder.

- The Main Body Of Lateral Electrode Arm Forms An Elbow In The Front So As To Minimize The Diameter Of The Electrode Pitch Circle.

- The Main Body Of The Central Electrode Arm Is Suitably Shaped In Height To Achieve The Triangulation Phase.

- Water Cooled Copper Contact Plate To Feed The Current To The Electrode.

- Water Cooled Electrode Clamping Band Made Of Welded Non Magnetic Steel Plate,And Complete With

Electrical Insulated Shaped Skids For Clamping The Electrode.

Electrode Locking And Clamp Opening Device Consisting Of:

- Simple Acting Cylinder For Clamping Opening.

- Package Of Disk Spring To Lock The Electrode Against The Contact Plate.

- Rod To Actuate The Electrode Clamping Band.

Set Of Insulating Materials For The Electrical Insulation Between Rod And Electrode Clamping Band.

Set Of Material For Electrical Insulation Of :

Electrode Arm From The Head Of The Electrode Lifting Column.

Electrode Skids From Clamping Band.

Set Of Hoses And Pipe For Cooling Water And Hydraulic