Beijing Xunengsun Technology Corporation |
Verified Suppliers
|
|
This is Abram from Surealong Group Corporation (Beijing,China).
As a professional manufacturer of timber connectors,we had lot of
experiences to export European market,North American market,New
Zealand and Australia market. and the packages could be printed
with your LOGO and company information.
Our products are certificated by CE and ISO9001:2008.
Main products include truss connector plate,perforated steel
strap,galvanized steel strap,gang nail plates,galvanized nail
plates,toothed connectors,toothed plates,joist hangers,truss
hangers,saddle purlin hanger,angle connectors,timber
connectors,wood connectors,lumber connectors,timber plates,post
support,steel ties
Galvanized gang nail plate is also could be called truss connector
plate.A truss connector plate is a kind of tie. Truss Plates are
light gauge metal plates used to connect prefabricated light frame
wood trusses. They are produced by punching light gauge galvanized
steel in order to have teeth on one side. The teeth will allow to
join different trusses together by being embedded into the lumber
using an hydraulic press or a roller.
Nail plates are used to connect timber of the same thickness in the
same plane. When used on trusses, they are pressed into the side of
the timber using special hydraulic tools. As the plate is pressed
in, the nails are all "driven" simultaneously and the compression
between adjacent nails reduces the tendency to split.
A truss connector plate is manufactured from ASTM A653/A653M, A591,
A792/A792M, or A167 structural quality steel and is protected with
zinc or zinc-aluminum alloy coatings or their stainless steel
equivalent. Metal connector plates have integral teeth and are
manufactured to various sizes (that is, length and width) and
thickness or gauges and are designed to laterally transmit loads in
wood. They are also known as stud ties, metal connector plates,
mending plates, or nail plates. However, not all types of nail
plates are approved for use in trusses and other structurally
critical placements.
Nail plates can be used in various applications, in particular for
jointing or the connection of wood elements in the same plan.
This is Abram from Surealong Group Corporation (Beijing,China).
As a professional manufacturer of timber connectors,we had lot of
experiences to export European market,North American market,New
Zealand and Australia market. and the packages could be printed
with your LOGO and company information.
Our products are certificated by CE and ISO9001:2008.
Main products include truss connector plate,perforated steel
strap,galvanized steel strap,gang nail plates,galvanized nail
plates,toothed connectors,toothed plates,joist hangers,truss
hangers,saddle purlin hanger,angle connectors,timber
connectors,wood connectors,lumber connectors,timber plates,post
support,steel ties
Joist hangers represent a critical design component that helps ensure a building's structural integrity. When factoring in load requirements, member size and costs, deciding on the best solution can be a daunting process. The Joist Hanger Selector from SUREALONG makes selecting the most cost‑effective hanger based on the type of installation, options and loads easier than ever.
SCREW TIE
1.2mm NZCC-SD Hot Dip Galvanized Steel
Meets NZS 3604:2011 and AS/NZS 2699.1:2000. This product is used to
tie brick veneer to timber framework using a Type 17-12g x 35mm Hex
Head Screw.
The actual ‘Tie’ is available in 85mm and 105mm lengths to suit
various cavity sizes and brick widths.
Suitable for all timber including dry stress graded 90mm x 35mm
studs.
Refer to brochure for application data. Available in Stainless
Steel 316.
Triple Grips are used for many nail fixed timber joints. Some of the applications include: – Roof Truss to Wall Plate. – Rafter or Ceiling Joist to Wall Plate. – Joist to Supporting Beam. – Purlin to Truss. – Hanger to Ceiling Joist. – Stud to Wall Plate Corner Studs to Wall Plate..
A quick, neat and effective connector between studs and wall
plates.
built-in nails are driven into the side grain of the stud to resist
wind uplift in lateral shear. This is far stronger than relying on
the withdrawal strength of common nails in end grain.
Stud Ties greatly improve the jointing of top and bottom plates to
studs compared to the common nail fixing.
Greater tie-down strength
No splitting of the timber
In-built nails are readily driven home with a conventional hammer,
saving time and effort.
Complies with AS1684 Bracing Units rules.
Heavy duty angle bracket
perforated band
CE CERTIFICATION
ROHS
Surealong Group Corporation specialize in Metal stamping,
metal(Steel, copper, Al, stainless steel etc.)fabrication, CNC
Machinig, Laser cutting,welding and assembly. Since Surealong
founded in 2010, he have been developed on low voltage component,
illuminate component, automatic component, medical equipment
component, communication component and precision equipment
component etc. scope, and now more than 200 Surealong people commit
themselves on develop this scope and new scope.
Total area of workshop is more than 6000 sqm,equipped 70 pressing
machine with the tonnage ranging from 3 to 300 ton,and with
supporting equipment for perform production from developing to mass
production.
Professional Experience:
Committed in stamping and assembly production for years,we have
obtained abundant experience on this field which can satisfy most
of client's requirements. In compliance with drawing or samples
from customer,to provide full service from tooling design to mass
production, there are around 20 skilled engineer for tooling design
and process technics, the lead-time from development counts from 3
days the shortest only and generally 2 weeks.
1) Industrial Package: Plastic Film+Carton+Wooden Pallet 2)
Commercial Package: Plastic Bag/Film+Carton+Wooded Pallet
2)Customized package
Abram Dong
SureAlong Group Corporation
Mobile Phone: 008613260091203
E-mail : autumn(at)xunengsun.com
Skype:abramdong