The principle and quality of polishing wax polishing Since the
hardness of the polishing wax is required to be higher than the
hardness and good resistance of the metal on the surface to be
polished, otherwise grinding cannot be achieved. Polishing wax
should have good heat resistance and thermal stability. During the
polishing process, with the high-speed rotation and friction of the
polishing wheel, the temperature of the polished surface rises
sharply. If the abrasive is easily thermally decomposed, its
hardness and resistance will decrease, affecting the polishing
effect. It has good stability, and the polishing wax does not have
any chemical reaction with the polished surface at the working
temperature, otherwise the polishing wax will change with the
inherent mechanical properties, which will affect the smoothness of
the polished surface. The production and manufacture of polishing
wax is a process of mixing materials evenly. First, all kinds of
materials without moisture are weighed according to the proportion,
and then the paste is put into the mixing melter for heating and
melting, and the abrasive is mixed evenly. The substance is slowly
put into the oil mixture paste solution that has been melted and
mixed evenly, and the mixture is mixed so that it is melted,
saturated and mixed evenly. , Heat and mix evenly until the surface
of the wax solution is uniform and shiny, stop heating, keep
stirring to make the temperature drop slowly, when the temperature
drops to a suitable discharge temperature, pour the wax solution
into the pre-prepared mold and cool it until the wax The surface of
the solution condenses, put it in cold water to cool and demould,
and put the wax into the box after drying the water. Therefore, the
polishing wax must be used within the shelf life, and the expired
polishing wax has no polishing effect on the product.