|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Mesh Size 100*100mm Motor 5.5kw Welded Wire Mesh Welding Machine
Welded Wire Mesh Welding Machine Introduction:
Main machine
1. The welded wire mesh welding machine is the device that
will position the longitudinal line and horizontal line with
pressure and power welding to form solder joints.The service life
of the upper contact pressure spring is more than 10000000 times
under the rated load.
2. Main motor adopts 5.5KW frequency conversion brake motor to
ensure welding pressure and speed.
3. Equipped with horizontal line detection device to ensure the
accurate position of horizontal line.
4. The power of a single welding transformer is 160KVA, with
cooling water circulation and temperature control detection switch,
to prevent the transformer from burning out.
Recycle pull mesh device
The circular and reciprocating drawing net is to pull the welded horizontal line out of the grid according to the parameters set by the program, and automatically cut off according to the set length of the mesh. Mesh hook to achieve pneumatic lifting, reduce working noise and damage to the mesh.
Control system
1. Main control cabinet operating platform (optional electrical
configuration according to customer requirements).
2. Adopt PLC programmable control system, touch screen operation
interface.
3. Each functional structure is equipped with fault detection
device, automatic alarm stop function.
4. Screen specifications and operating parameters of each mechanism
are set through the touch screen interface.
5. The welding current and time are set by the touch screen on the
main control cabinet.
Welded Wire Mesh Welding Machine Technical Parameters:
| Item | Basic Parameters |
| Mesh width | 2.4m |
| Mesh length | 45m in roll mesh |
| Longitudinal wire diameter | 3-6mm |
| Horizontal wire diameter | 3-6mm |
| Longitudinal wire space | 50-250mm |
| Horizontal wire space | 25-300mm |
| Number of welding electrode | 48PCS |
| Main motor power | 7.5kw |
| Raw material | Galvanized wire,black wire. |
| Welding speed | 40-60 times/minute |
| Welding transformer | 160kva*6pcs |
| Longitudinal wire feeding method | Coil wire feeding automatically |
| Horizontal wire feeding method | Pre-cut feeding automatically |
| Welding press | By spring press |
| Adjust longitudinal wire space | By manual to move the welding electrode |
| Adjust horizontal wire space | By touch screen |
| Pulling mesh method | By servo motor to pull mesh |
| Welding capacity | 1. Wire diameter 3-4mm, each transformer with 8 welding electrodes,
Minimum mesh size 50*50mm 2. Wire diameter 4-5mm, each transformer with 6 welding electrodes, minimum mesh size 75*75mm 3. Wire diameter 5-6mm, each transformer with 4 welding electrodes, minimum mesh size100*100mm |
Welded Wire Mesh Welding Machine Applications:
It is widely used in airport runways, highways, tunnels, multi-storey high-rise buildings, water conservancy dam foundation, sewage treatment ponds and so on.
Welded Wire Mesh Welding Machine Photos:
