|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Welding Speed Fast Mesh Size 1 Inch Chicken Cage Wire Mesh Welding Machine
Wire Mesh Welding Machine Introduction:
This is our new developed chicken cage wire mesh welding machine. The welding speed can be up to a maximum of 100 times/min. It has the advantage of easier machine maintenance, fewer machine problems, easier to learn and operate, save power and consumption, less welding spark, etc. The biggest advantage of cage mesh wire mesh welding machine is that can produce 2 pieces cages meshes. Increase production capacity.
Wire Mesh Welding Machine Features:
1. The edge cutter is controlled by two big air cylinders on two sides, There is one cutter in the middle of the machine. The cutter will cut the mesh into 2 pieces. The cutting speed can match the welding speed.
2. The servo motor for pulling mesh, cross wire space can be adjusted by PLC.The pulling rack is the J&T brand, more accurate, less noise.
3. The mesh cutting is automatic, max.1m length. After cutting, the mesh can fall down automatically to the mesh stacking car.
4. The veritical wire and cross wire both are from coil wire feeding automatic. The wire diameter range from 1.5-2.7mm.
5. The welding transformer is 100KVA. The chicken cage wire mesh welding machine has 9 pieces welding transformers. As the machine has 101 welding electrodes. Every 12 welding electrodes need one welding transformer.
6. The chicken cage wire mesh welding machine need power transformer 50KVA to supply machine running. And the distance from power transformer to the chicken cage wire mesh welding machine should within 100 meters.
7. The pulling mesh car will pull the mesh automaticlly. The pulling mesh car is controlled by servo motor. Pulling mesh size is much more accurate then stepping motor.
8. The chicken cage wire mesh welding machine can make different mesh width and mesh size according to your requirement. All the parameters can be adjustable by PLC in the control cabinet.
Wire Mesh Welding Machine Technical Parameters:
| Model | DX-GWD-1200 | DX-GWD-1500 | DX-GWD-1800 |
| Wire diameter | 1.5-2.7mm | ||
| Vertical wire space | 1/2 inch 1 inch 2 inches 3 inches 4 inches | ||
| Cross wire space | Min.25mm or smaller (PLC control) | ||
| Mesh width | Max.1200mm | Max.1500mm | Max.1800mm |
| Welding electrodes | 48pcs | 60pcs | 101pcs |
| Welding transformer | 125kva*4pcs | 125kva*5pcs | 100kva*9pcs |
| Vertical wire feeding | Form wire coils | ||
| Cross wire feeding | From wire coils | ||
| Welding speed | Max.100 times/min | ||
| Space needed | 12*5m | ||
| Machine weight | 3100kg | 3600kg | 4700kg |
Wire Mesh Welding Machine Applications:
The finished product is widely used in chicken cage,rabbit cage,animal cage and other construction mesh fields.
Wire Mesh Welding Machine Packaging:
Wire Mesh Welding Machine Photos:
