|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Mesh Panel Size 1.2*2.4m Wall Mesh Construction Mesh Panel Welding Machine
Construction Mesh Panel Welding Machine Introduction:
Function features: Panasonic servo motor pulling mesh panel auto back and forth.
1. This construction mesh panel welding machine adopts synchronous control technique. The center-control and welding time are composed of Panasonic PLC program system. The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable.
2. The cross wire system is controlled by stepping motor. The falling cross wire is automatically one by one. Increasing productivity.The machine stops automatically if cross wires are used up in the hopper.
3. Adjustable longitude wire space and weft wire space according to your required mesh size.. The greatest advantage is that you can adjust the space of longitude wire space and weft wire space at random on the same one piece mesh panel.
4. Mesh pulling system is controlled by servo-motor (Panasonic brand) that adopts elastic
tension and opening positioning mesh, which improves the precision of mesh opening size.
5. Welding transformer: 160KVA*6PCS(48 welding spots.) every 8 welding spots need one water cooling transformer.
6. Wire feeding way:The line wires is feeding from coil wire automatic. The line wire through the straighten wheel device. To make the line wire straighten, then the line wire reach the welding machine, and cross wires should be pre-straightened and pre-cut, put the cross wire into the hopper device. The cross wire hopper device can load 100kg wires. The cross wire is feeding automatic with the help of stepping motor.
7. Material:Suitable for galvanized wire, low carbon iron wire, MS wire,ribbed wire, cold drawn wire and so on.
Construction Mesh Panel Welding Machine Technical Parameters:
| Model | DX-GWCD-1200 | DX-GWCD-2100 | DX-GWCD-2500 |
| Machine weight | 2.8T | 3.9T | 4.8T |
| Machine size | 7500*1900*1700mm | 7500*2900*1700mm | 7500*3300*1700mm |
| Control system | PLC and touch screen | PLC and touch screen | PLC and touch screen |
| Frequency converter | Delta brand,China | Delta brand,China | Delta brand,China |
| Control switch | Schneider France | Schneider France | Schneider France |
| Wire diameter | 2.5-6.0mm | 2.5-6.0mm | 2.5-6.0mm |
| Welding mesh width | Max. 1200mm | Max. 2100mm | Max.2500mm |
| Line wire space | 50-300mm | 50-300mm | 50-300mm |
| Cross wire space | 50-300mm | 50-300mm | 50-300mm |
| Welding speed | 60-85 times per min | 60-80 times per min | 60-75 times per min |
Construction Mesh Panel Welding Machine Applications:
The construction mesh panel is used in the construction industry as
an essential building material for the shule plate net and
partition mesh, wall mesh, subgrade steel mesh, and mountain slope
greening guest soil spraying.
Additional hot dip galvanizing can be used as flower shelf net,
high salt area sea protection mesh.Can also be made shelf, heavy
shelf mesh.
Construction Mesh Panel Welding Machine Packing:
Construction Mesh Panel Welding Machine Photos:
