|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Servo Motor Pull Mesh CNC Welded Wire Fence Mesh Panel Welding Machine
Welded Wire Fence Mesh Panel Welding Machine Introduction:
1. Control System
The control system adopts synchronous control technique. The
welding time and separate welding are controlled by computer with
PLC program touch screen system and HMI.
2. Mesh Pulling Part
The mesh pulling system controlled by servo-motor adopts elastic
tension and opening positioning mesh, which improves the precision
of mesh opening size.
3. Line wire sending part
The mesh sending system is controlled by computer. It simplifies
the process that every tensile spring has to be changed when the
wire diameter is different. You only need to change the pressure of
welding point. Welding aperture can adjust randomly within range.
4. Wire Feed Way
The line wires and cross wires should be pre-straightened and
pre-cut.
The line wire is feeding by the servo motor, pulling the mesh the
servo motor auto. The cross wires are fed automatically from the
multi hopper which capacity is more over ten times than the
traditional hopper.
Welded Wire Fence Mesh Panel Welding Machine Features:
1. The PLC adopt Panasonic Jpan
2. The touch screen adopt Wenview China
3. The low-voltage apparatus adopt Schneider France
4. The air switch adopt Schneider France.
5. The power supply adopt Omron Japan
6. The frequency converter adopt Delta China.
7. The servo motor adopt Panasonic Japan.
Welded Wire Fence Mesh Panel Welding Machine Technical Parameters:
| Model | DX-GWC-2000 | DX-GWC-2500 |
| Wire diameter | 3.0-6.0mm | 3.0-6.0mm |
| Line wire space | 50-250mm | 50-250mm |
| Cross wire space | 50-300mm | 50-300mm |
| Line wire type | Pre-cut | Pre-cut |
| Cross wire type | Pre-cut | Pre-cut |
| Width of mesh | 2000mm | 2500mm |
| Length of mesh | 7000mm | 7000mm |
| Welding transformer | 125KVA*5PCS | 125KVA*6PCS |
| Material of welding electrode | Red copper | Red copper |
| Number of welding electrode | 40pcs | 48pcs |
| Control switch | Schneider France | Schneider France |
| Freqyency converter | Delta China | Delta China |
| PLC | Mitsubishi Japan | Mitsubishi Japan |
| Machine weight | 4000kg | 4500kg |
| Machine dimension | 7500x2700x1700mm | 7500x3200x1700mm |
Welded Wire Fence Mesh Panel Welding Machine Applications:
It is widely used in industry and construction, such as building board, the roof, the wall, the bridge, concrete road, the floor, the airport, cement pipe, concrete prefabricated components, retaining wall, protection slope, the tunnel, the dock, the dyke, construction reinforcing mesh; highway; railway; bridge; enclosure mesh; fencing and so on.
Welded Wire Fence Mesh Panel Welding Machine Photos:
