Anping Dixun Wire Mesh Products Co., Ltd |
Verified Suppliers
|
25mm Thickness Metal Plate Machine Weight 5.5T Welded Roll Mesh Making Machine
Welded Roll Mesh Making Machine Introduction:
1. The welded roll mesh making machine adopts imported PLC
Programmable Control System and touch screen operation surface to
achieve automatic longitudinal wire feeding from coil wire,
automatic welding, automatic pulling mesh, automatic winding mesh.
2. The longitudinal wire is feed from coil wire automatic. The
weight of coil wire max 300kg put into payoff wire stands. Save
labor cost and labor strength. The longitudianl wire through the
straighten device. make sure the steel wire straigth. The cross
wire is pre-straighten and pre-cut by wire straightening and
cutting machine. The cross wire is put into cross wire hopper
device. The cross wire hopper device can load 150kg steel wires.
The cross wire falling is controlled by stepping motor.
3. When the longitudianl wire is under the welding electrodes. You
could set the parameters input by touch screen. Such as: input
cross wire mesh size, width of mesh, welding speed per min and
length of roll mesh. Very easy to operate and master. After input
all the parameters. Press the button in the control cabinet. The
welded roll mesh making machine start to work.
4. The pulling mesh system is controlled by servo motor and air
cylinder. Welding firmly, can adjust the second voltage of the
welding transformers according to different wire diameters.Welding electrodes- chromium zirconium copper Upper-20mm diameter
Lower-20*20*20mm, can be used 6 sides,The welding electrode distance can be adjusted.
5. According to requirements, you can set the mesh length in the
touch screen to achieve the length of mesh. The winding mesh
machine is variable-frequency, The speed of winding mesh is
adjustable. After finished one roll mesh. Need worker to take out
the roll mesh.
Welded Roll Mesh Making Machine Technical Parameters:
Model | DX-GWCD-2000 | DX-GWCD-2500 |
Thickness of metal plate | 30mm | 30mm |
Machine weight | 5.5T | 5.8T |
Control system | PLC and touch screen | PLC and touch screen |
Machine dimension | 6500*2700*1700mm | 6500*3200*1700mm |
Control switch | Schneider | Schneider |
Frequency converter | Delta | Delta |
Wire diameter | 3.0-6.0mm | 3.0-6.0mm |
Width of mesh | 2000mm | 2500mm |
Line wire space | 100-250mm | 100-250mm |
Cross wire space | 50-300mm | 50-300mm |
Main motor | 4.0kw | 5.5kw |
Length of mesh | 15-100m | 15-100m |
Pulling mesh system | Servo motor | Servo motor |
Labor cost | Two workers | Two workers |
Welded Roll Mesh Making Machine Applications:
Used in garden fence, roof construction,road construction, wall building.
Welded Roll Mesh Making Machine Packing:
Welded Roll Mesh Making Machine Photos: