Active Member
|
[China]
Address: Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Contact name:
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
|
PLC Concrete Reinforcing Wire Mesh Welding Machine For Building Construction
1. This machine adopts Japan brand Panasonic PLC program.
2. The input front-panel is Weinview touch screen.
3. Schneider(France) low voltage electric,Schneider (France) Air switch.
4. Delta(Taiwan) frequency inverter.
5. ABB Switzerland switch.
6. Brake motor &helical gear reducer connect principle axis directly,strong power.
7. Panasonic servo motor for mesh pulling,high precision.
8. Germany cable carrier on the side for mesh pulling.
9. Step motor and SMC(Japan) air cylinder in the hopper device,the cross wire fall down from the hopper automatically.
10. Adjustable longitude wire space and cross wire space.
11. Water-cooling type welding transformers,PLC control welding degree,adjustable.
12. The machine stops automatically if cross wires in the hopper are used up..
| Model | MLG-GW-2500A | Wire diameter | 5mm-12mm |
| Longitude wire space | 100mm-300mm | Cross wire space | 50mm-300mm |
| Mesh width | Max.2.5m | Mesh length | Max.12m |
| Welding speed | 45-65times/min | Cross wire feeding | Pre-straightened &pre-cut |
| Welding electrodes | 24pcs | Rated electrical power | 150kva*12pcs |
| Machine size | 14m*3.2m*2.3m | Weight | 6500kg |
Accessories
1 Cross wire hopper
2 Pulling mesh part
Finished product
