ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
CNC Concrete rebar Steel Mesh Welding Machine For Width 3000mm
Product introduction:
1. The concrete rebar steel mesh welding machine control system
adopts synchronous CNC technology, Panasonic PLC program and HMI.
It is easy and convenient to operate with the touching screen.
2. The fallen wire system sends weft wires one by one automatically
instead of putting wefts wires by manual work, increasing
productivity. The weft wire feeding from the multi hopper which capacity is 1.5T,
more over ten times than the traditional hopper.
3. The sending mesh system controlled by computer can
make—Adjustable distance of line wire that allows different opening
size between the line wire, when input the distance of cross wire
to computer, any character can be reach. Welding aperture can
adjust randomly within range.
4. The main engine adopts imported and famous pneumatic components,
making the service life long.
5. The welding wire is accurate and the welding points are firm for
the big pressure.
6. This machine equips typical and efficient transformer, which
gearless adjusted, enlarging the welding range.
7. Mesh drawing system is controlled by servo-motor that adopts
elastic tension and opening positioning mesh, which improves the
precision of mesh opening size.
8, Transformer:125KVA*13(26welding heads) ——every two welding heads
need a water cooling transformer.
9, Wire feeding way:The line wires and cross wires should be
pre-straightened and pre-cut, then be put by manual work.
Main parameter:
Wire diameter | 5--12mm | Line wire form | pre-cut wire |
Weft wire distance | 100mm--300mm (adjustable) | Weft wire form | pre-cut wire |
Line wire distance | 100mm--300mm (adjustable) | Rated voltage | 380V/50HZ 3 phase |
Mesh width | 3000mm | Water cooling Transformer | 125KVA X 13 |
Welding speed | 40-- 50times/min | Overall dimension | 20X 3.4X 2.4M |
Welding spot heads. | 31 | Max. mesh length | 6m |
Total weight | 8.5T | Motor | 11KW |
Applications;