PLC Panasonic Automatic Welded Mesh Machine For Making Roll Mesh

              PLC Panasonic Automatic Welded Mesh Machine For Making Roll Mesh 

Product description 

1. The automatic welded mesh machine use PLC Panasonic program. it is very easy to operate.

2. The longitude wire is fed from wire coils automatically and through precise straight setting equipment.

3. The cross wires should be pre-straightened&pre-cut, then fed from hopper device automatically.

4. The hopper device is controlled by step motor and has high capacity.

5. Mesh pulling system adopts elastic pulling bar, which makes the mesh opening size more accurate.

6. Sealed water cooling welding transformers, the scoria can not go in while welding, not easily burned.

7. The fallen wire system is controlled by stepping motor instead of putting wefts wires by manual work, increasing productivity.

8. Adjustable distance of line wire that allows different opening size between the line wire, when input the distance of cross wire to control cabinet by touch screen, any mesh opening can be reach. Welding aperture can adjust randomly within range.

9. The length of mesh can be adjustable in the control cabinet. Such as you need produce length of mesh 50m in roll. mesh size 10*10cm. So input quantity of mesh opening 50 into the control cabinet by touch screen.The machine will produce length of mesh 50m in roll.

10, Wire feeding way:The line wires from coil wire. and cross wires should be pre-straighten and pre-cut.

11, Material: Suitable for low carbon iron wire,black annealed wire, cold galvanized wire, hot galvanized wire.

Technical details

Application

The finished product welded mesh is widely used in airport fence. highway fence. railway fence and building construction.