Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
1006D306 / KYA-M7024-000 BRACKET LN SENS Hitachi Smt Spare Parts for F8
| Part No | KYA-M7024-000/1006D306 |
| Part Name | BRACKET_LN_SENS |
| Condition | Compatible new / Original new |
| Material | plastic |
| Usage | Hitachi F8 machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| PIN_LOCATE | KYD-MC132-000 |
| BELT | N510021326AA |
| FILTER | K46-M8527-COX |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| LINE-SENSOR | KYF-M8607-000 |
| FEEDER CABLE | KYL-M869D-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| 933 NOZZLE | 00346523-03 |
| PCB-MOUNT | KYK-M861W-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| HNS,LIGHTING | KYF-M861W-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| COVER | KYK-M86RD-000 |
| SONY NOZZEL AF12082 | AF12082 |
| LEVER | KYB-M3T0M-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| HOLDER | KYB-M701R-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| PIN,HINGE | KYB-M3T31-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| POWER SUPPLY | 1-474-020-11 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| BELT | 6*3080*0.9 mm |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| ACCESSORY,SV | KYL-M861C-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| BLOCK | KYF-M867D-000 |
| SPRING_COMP | KYD-MCN41-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SONY NOZZEL | AF10071 |
| GEAR | KYD-MC23C-000/6301352305 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| VALVE | SY3120-MZD-C6-F2 |
| ASSY_GEAR | KYD-MC412-000 |
| PIN_HINGE | KYD-MC41U-000 |
| SPRING_COMP | KYD-MC129-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT | N510060977AA |
| ASSY_LEVER | KYD-MC212-000 |
| NPM 235C NOZZLE | N610043814AD |
| SPRING COMP | KYD-MC422-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| ROCK | 2-149-675-01 |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY,LEVER | KYM-M864H-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| SONY1000 FILTER | 4-761-920-01 |
| NOZZLE_HG33C | KYA-M7703-000 |
| CYLINDER | KYL-M869A-000 |
| ASSY GEAR | KYD-MC211-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BELT | N510065133AA |
| LEVER | KYB-M3T01-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| DISK | KYB-M3T1A-000 |
| CASE-CONN | KYF-M860Y-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| FUSE | KYL-M86KH-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE | HG53G |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| VALVE | SY3240-5LZD |
| NOZZLE(HB03C) | KYB-M7720-100 |
| GEAR | KYU-M868B-000 |
| SENSOR | KYF-M8681-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GEAR | KYD-MC20K-00 |
| PCBA FIXTURE | FC150-130-60 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BOTTON | ZB6-EB3B |
| NOZZLE_HV19C | KYA-M7719-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ETC MOTOR | PK2K93S-2D |
| MOTOR | KYA-M700R-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| Fuji Packing | PH00991 |
| TOOL | N510031628AA |
| GERA(HASUBA) | KYD-MC131-000 |
| GRIP | KYD-MC109-000 |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYD-MC41S-000 |
| NPM FILTER | N610097899AA |
| NPM H16 SENSON | N510054833AA |
| COVER (12/16mm) | KYD-MC20Y-000 |
| FEEDER | GD38080 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BALL | 4-719-920-01 |
| LEVER | KYB-M3T33-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 234F NOZZLE | 45466931 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BLOCK L3 | KYB-M960C-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| HOLDER | KYB-M702F-000/0916DK2D |
| GUIDE,LINEAR | KYK-M86KY-000 |
| TIMING BELT | KYB-M919E-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SONY MOTHER BOARD | 1-797-651-12 |
| VALVE | 4-187-212-01 |
| BLOCK | KYA-M7027-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| PIN_HINGE | KYD-MC42S-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SONY NOZZLE | CF25200 |
| GEAR | 4-719-921-02 |
| SLIP RING | KYB-M7027-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| PIN,HINGE | KYL-M860R-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| COUPLING | KYB-M7116-000 |
| NPM 235CS NOZZLE | N610043815AA |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SPRING | P/N:0730C-0252 |
| ASSY,LEVER | KYM-M8648-000 |
| PIN_LOCATE | KYD-MC137-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY,SPROCKET | KYM-M862A-000 |
| COVER | KYM-M860X-000 |
| LEVER | KYK-M861V-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| SHAFT ASSY. | KYF-M864U-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| GT38080 FEEDER | GT38080 FEEDER |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| BLOCK | KYL-M86KC-000/211G5472 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SPRING COMP | KYD-MC13T-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| SEAL | KYT-M862W-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| BELT | 00334936S01 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| 360F NOZZLE | 45466917 |
| COVER ASSY | X-4700-067-4 |
| DEK SQUEEGE | DEK-03T 长25CM |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| CPK JG0250 | CPK JG0250 |
| NPM H16 SHAFT | N510064335AA |
| ASSY_GEAR | KYD-MC40F-000 |
| NPM X479 VALVE | N510054843AA |
| WASHER | 92902-03200 |
| NPM H8 SENSON | N510048691AA |
| BUSH,BEARING | KYB-M3T3S-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(FA04) | KYB-M77F4-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY_GEAR | KYD-MC11A-000 |
| ASSY,GEAR | KYM-M862C-000 |
| GEAR | KYD-MC424-000/223E0481 |
| VALVE | 2-673-684-01 |
| PIN-GAUGE | KXF00YHTA00 |
| COVER(LB) | KYM-M8657-000 |
| COUPLING | KYK-M86AW-000 |
| BELT TIMING | KYA-M9152-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| HELICAL SPRING | N210068065AA |
| PIN-GAUGE | KXF00YHUA00 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| 937 NOZZLE | 00322591-06 |
| SENSOR,PELEC | KYK-M86DE-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| SPRING_COMP | KYB-M91CS-000 |
| SLIP RING | KYB-M7027-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| COUPLING | KYB-M702C-000 |
| YG12 BELT | KHY-M9129-10 |
| FFU | MX--575-A |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| WASHER | 92902-03100 |
| GREASE FOR PANASONIC | N510048188AA |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| 1220 NOZZLE | 51305323 |
| NPM 240C NOZZLE | N610062681AD |
| DSP-2008K SQUEEGE | L:20CM |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| SEAL | KYB-M702B-000 |
| ROLLER(B) | KYK-M86EM-000 |
| MOTOR_DC | KYD-MC410-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BELT | 44548605 |
| PIN,HINGE | KYB-M3T2Y-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| 340F NOZZLE | 45466934 |
| NPM 230C NOZZLE | N610040784AD |
| FAN | 1204KL-04W-B59 |
| HNS,CORD | KYL-M8621-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BELT | 00200341-01 |
| WASHER | KYD-MC22H-00 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GREASE | N990PANA-023 |
| NOZZLE_HV13C | KYA-M7713-000 |
| CORD,BCR | KYF-M86NC-000 |
| 935 NOZZLE | 00346524-03 |
| WASHER | 90990-37J010 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| COVER(RB) | KYD-MC10L-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| PLATE | KYA-M3804-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| BM02 NOZZLE | BM02 |
| Fuji Filter | AA1FZ04 |
| POWER SUPPLY | 11632XA |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_SHAFT | KYF-M8651-000 |
| SPRING_COMP | KYD-MC3T-000 |
| YG12F BELT | KHY-M9129-00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| SENSOR-PELEC | KYK-M861Y-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| LEVER | KYB-M3T22-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| GEAR | KYD-MC23C-00 |
| GUIDE | KYD-MC11T-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| MICRO METER | 350-251-30 |
| ARM STEEL | N210007284AB |
| NPM 185 NOZZLE | N610070338AB |
| PLATE | N610014970AE |
| BELT_TIMING | KYA-M914W-000 |
| LEVER | KYK-M86LV-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| LEVER | KYB-M3T21-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| COVER(RB) | KYM-M8612-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GEAR | KYD-MC21U-000 |
| SEAL | KYB-M704E-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| DRIVER | N510002593AA |
| NPM 226CS NOZZLE | N610040783AB |
| DD MOTOR | KYF-M860E-000 |
| 938 NOZZLE | 00322592-05 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| UNIT,I/O | KYL-M86LV-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| SENSOR,PELEC | KYL-M8609-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| ASSY GRIP | KYD-MC21H-000 |
| GEAR | KYK-M864C-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| SDD Hard Disk | N610059692AA |
| GEAR | KYD-MC153-00 |
| NPM 230CS NOZZLE | N610040788AD |
| GUIDE,LINEAR | KYK-M86LE-001 |
| CASE-CONN | KYK-M860Y-000 |
| POGO BLOCK | 0738A-0029 |
| NOZZLE_HV14C | KYA-M7714-000 |
| KIC ON BOARD | 6-10 CHANEL |
| COVER(MAK1-2) | KYD-MC11X-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| Encoder Read Head For Universal | 49566101 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| GXH SPECIAL NOZZLE | 13053 |
| PIPE FITTING | 630 048 4656 |
| B-234 NOZZLE | 47561103-B-234 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ASSY_CABLE | KYL-M86NC-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
