Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M370P-000 / 10051A58 ASSY-EXT-FEEDER-PWR Hitachi Smt Spare Parts
| Part No | KYB-M370P-000/10051A58 |
| Part Name | ASSY-EXT-FEEDER-PWR |
| Condition | Compatible new |
| Usage | Hitchi machine |
| Type | Hitchi Smt part |
Hot sale stock list:
| GEAR | KYD-MC23C-00 |
| ASSY GEAR | KYD-MC211-000 |
| WASHER | 92902-03200 |
| PIN,HINGE | KYB-M3T31-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| 938 NOZZLE | 00322592-05 |
| SONY NOZZEL AF12082 | AF12082 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| COUPLING | KYB-M702C-000 |
| DSP-2008K SQUEEGE | L:20CM |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| LEVER | KYK-M861V-000 |
| GREASE | N990PANA-023 |
| ASSY,LEVER | KYM-M8648-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| POGO BLOCK | 0738A-0029 |
| BELT | 6*3080*0.9 mm |
| KIC ON BOARD | 6-10 CHANEL |
| CASE-CONN | KYF-M860Y-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| YG12F BELT | KHY-M9129-00 |
| NOZZLE_HV13C | KYA-M7713-000 |
| NPM 240C NOZZLE | N610062681AD |
| POWER SUPPLY | 11632XA |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| 904 NOZZLE | Y074-V904-0015 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BELT TIMING | KYA-M9152-000 |
| CASE-CONN | KYK-M860Y-000 |
| GREASE FOR PANASONIC | N510048188AA |
| B-234 NOZZLE | 47561103-B-234 |
| GERA(HASUBA) | KYD-MC131-000 |
| COVER ASSY | X-4700-067-4 |
| SEAL | KYB-M702B-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT | 44548605 |
| LEVER | KYB-M3T22-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| DD MOTOR | KYF-M860E-000 |
| DRIVER | N510002593AA |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SEAL | KYT-M862W-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SPRING_COMP | KYB-M91CS-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PLATE | N610014970AE |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY_TENSION | KYD-MC21N-000 |
| SLIP RING | KYB-M7027-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ASSY_LEVER | KYD-MC212-000 |
| PIN,HINGE | KYD-MC41S-000 |
| GEAR | KYD-MC153-00 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| HELICAL SPRING | N210068065AA |
| HNS,LIGHTING | KYF-M861W-000 |
| PIPE FITTING | 630 048 4656 |
| FEEDER | GD38080 |
| UNIT,I/O | KYL-M86LV-000 |
| COUPLING | KYK-M86AW-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| COVER(RB) | KYM-M8612-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| POWER SUPPLY | 1-474-020-11 |
| GT38080 FEEDER | GT38080 FEEDER |
| UNIT-DRIVER | KYK-M861A-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| FAN | 1204KL-04W-B59 |
| CAM_FOLLOWER | KYA-M912N-000 |
| LEVER | KYB-M3T0M-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BOLT-HEX-SCT | 90990-01J115 |
| PIN,LOCATE | KYD-MCN3N-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| NPM FILTER | N610097899AA |
| SONY MOTHER BOARD | 1-797-651-12 |
| ASSY_GEAR | KYD-MC40F-000 |
| RT BELT | 3-212-264-01 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| PCB-MOUNT | KYK-M861W-000 |
| PIN_LOCATE | KYD-MC132-000 |
| SEAL | KYB-M704E-000 |
| SONY NOZZEL | AF10071 |
| VALVE | 2-673-684-01 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| Encoder Read Head For Universal | 49566101 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BOTTON | ZB6-EB3B |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BELT | 00334936S01 |
| WASHER | 90990-37J010 |
| TAIL PIVOT | P/N:0740C-0109 |
| BUSH,BEARING | KYB-M3T3R-000 |
| GEAR | KYD-MC20K-00 |
| SPRING_COMP | KYD-MC129-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| SENSOR,PELEC | KYK-M86DE-000 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY,HOOK | KYD-MC40A-000 |
| FILTER | K46-M8527-COX |
| SPRING COMP | KYD-MC13T-000 |
| PIN-GAUGE | KXF00YHUA00 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| ASSY,GEAR | KYM-M862C-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| 360F NOZZLE | 45466917 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SLIP RING | KYB-M7027-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| CYLINDER | KYL-M869A-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| BLOCK | KYF-M867D-000 |
| BM02 NOZZLE | BM02 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| COVER | KYM-M860X-000 |
| 937 NOZZLE | 00322591-06 |
| P_RCG_SCOPE | KYB-M730B-000 |
| 234F NOZZLE | 45466931 |
| GEAR | 4-719-921-02 |
| BELT_TIMING | KYA-M914W-000 |
| LEVER | KYB-M3T01-000 |
| WASHER | KYD-MC22H-00 |
| NOZZLE_HV14C | KYA-M7714-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| WASHER | 92902-03100 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| BALL | 4-719-920-01 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| SDD Hard Disk | N610059692AA |
| NOZZLE | HG53G |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| Fuji Packing | PH00991 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| MOTOR | KYA-M700R-000 |
| HNS,CORD | KYL-M8621-000 |
| NPM H16 SENSON | N510054833AA |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| VALVE | 4-187-212-01 |
| BLOCK | KYA-M7027-000 |
| MOTOR_DC | KYD-MC410-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| COVER | KYK-M86RD-000 |
| VALVE | SY3120-MZD-C6-F2 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| BELT | N510065133AA |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM X479 VALVE | N510054843AA |
| BELT | 6*3080*0.9 mm |
| LEVER | KYB-M3T21-000 |
| SENSOR | KYF-M8681-000 |
| TIMING BELT | KYB-M919E-000 |
| ARM STEEL | N210007284AB |
| COVER(LB) | KYM-M8657-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| LINE-SENSOR | KYF-M8607-000 |
| NPM 230C NOZZLE | N610040784AD |
| 935 NOZZLE | 00346524-03 |
| SHAFT ASSY. | KYF-M864U-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| DISK | KYB-M3T1A-000 |
| NPM 226CS NOZZLE | N610040783AB |
| SPRING COMP | KYD-MC422-000 |
| PIN-GAUGE | KXF00YHTA00 |
| NOZZLE_HG52C | KYA-M7705-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| ASSY_GEAR | KYD-MC11A-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| GXH SPECIAL NOZZLE | 13053 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE(FA06) | KYB-M77F6-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| TOOL | N510031628AA |
| YG12 BELT | KHY-M9129-10 |
| NPM 230CS NOZZLE | N610040788AD |
| SONY NOZZLE | CF25200 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GXH-1 FILTER | KYL-M860S-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GRIP | KYD-MC109-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| LEVER | KYK-M86LV-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| CPK JG0250 | CPK JG0250 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY,LEVER | KYM-M864H-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| NPM 185 NOZZLE | N610070338AB |
| FFU | MX--575-A |
| BUCK_UP_PIN | KYA-M3802-000 |
| BELT | N510021326AA |
| BRACKET | KYL-M86KD-000/211FC709 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| COUPLING | KYB-M7116-000 |
| 1220 NOZZLE | 51305323 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| NPM 235C NOZZLE | N610043814AD |
| BLOCK | KYL-M86KC-000/211G5472 |
| SPRING_COMP | KYD-MC3T-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COVER(RB) | KYD-MC10L-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| FEEDER CABLE | KYL-M869D-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NPM 235CS NOZZLE | N610043815AA |
| PIN_LOCATE | KYD-MC21Y-000 |
| 340F NOZZLE | 45466934 |
| SPRING | P/N:0730C-0252 |
| NPM H8 SENSON | N510048691AA |
| BELT | N510060977AA |
| MICRO METER | 350-251-30 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| GREASE GUN KH-35 | KXF08V7AA00 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| BUSH,BEARING | KYB-M3T3S-000 |
| LEVER | KYB-M3T33-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| SPRING_COMP | KYD-MCN41-000 |
| VALVE | SY3240-5LZD |
| ROLLER(B) | KYK-M86EM-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ROCK | 2-149-675-01 |
| NPM H16 SHAFT | N510064335AA |
| GEAR | KYK-M864C-000 |
| ETC MOTOR | PK2K93S-2D |
| GEAR | KYD-MC21U-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| SENSOR,PELEC | KYL-M86HL-000 |
| BLOCK L3 | KYB-M960C-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| FUSE | KYL-M86KH-000 |
| PLATE | KYA-M3804-000 |
| HOLDER | KYB-M701R-000 |
| GUIDE | KYD-MC11T-000 |
| CORD,BCR | KYF-M86NC-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| GUIDE,LINEAR | LWHD12X3 |
| PIN_LOCATE | KYD-MC137-000 |
| PIN,HINGE | KYL-M860R-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| GUIDE,LINEAR | KYK-M86LE-001 |
| GEAR | KYU-M868B-000 |
| PIN_HINGE | KYD-MC41U-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| PCBA FIXTURE | FC150-130-60 |
| 933 NOZZLE | 00346523-03 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| DEK SQUEEGE | DEK-03T 长25CM |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| MACHINE SCREW | KYD-MC14G-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| GEAR | KYD-MC424-000/223E0481 |
| GEAR | KYD-MC23C-000/6301352305 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| Fuji Filter | AA1FZ04 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
