Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
09262306 / PLATE(SUP) 12/16mm Feeder Hitachi Smt Spare Parts
| Part No | 9262306 |
| Part Name | PLATE(SUP) |
| Condition | Original news or Compatible new |
| Material | steel |
| Usage | Feeder Machine |
| Type | SMT Hitachi 12/16mm part |
Hot sale stock list:
| HNS,CORD | KYL-M8621-000 |
| GEAR | KYD-MC23C-00 |
| NPM H8 SENSON | N510048691AA |
| SEAL | KYB-M704E-000 |
| BELT | N510065133AA |
| LEVER | KYB-M3T0M-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| LINE-SENSOR | KYF-M8607-000 |
| NPM 185 NOZZLE | N610070338AB |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| SPRING_COMP | KYD-MCN41-000 |
| VALVE | SY3120-MZD-C6-F2 |
| ROLLER(B) | KYK-M86EM-000 |
| BELT | N510060977AA |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BALL | 4-719-920-01 |
| SLIP RING | KYB-M7027-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NOZZLE(VC74) | KYK-M7725-000 |
| SLIP RING | KYB-M7027-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| SENSOR | KYF-M8681-000 |
| BELT | N510021326AA |
| BOTTON | ZB6-EB3B |
| SENSOR,PELEC | KYL-M86HL-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| DRIVER | N510002593AA |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| GRIP | KYD-MC109-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| COVER(HIRA-1) | KYD-MC20X-000 |
| 1220 NOZZLE | 51305323 |
| BM02 NOZZLE | BM02 |
| COVER(RB) | KYM-M8612-000 |
| PLATE | KYA-M3804-000 |
| ROCK | 2-149-675-01 |
| BLOCK | KYF-M867D-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| 340F NOZZLE | 45466934 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| MOTOR_DC | KYD-MC410-000 |
| FEEDER CABLE | KYL-M869D-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SONY NOZZEL | AF10071 |
| ASSY_GEAR | KYD-MC40F-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| MICRO METER | 350-251-30 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| PIN,HINGE | KYD-MC41S-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COUPLING | KYB-M7116-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| LEVER | KYB-M3T22-000 |
| ASSY_LEVER | KYD-MC212-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| PIN-GAUGE | KXF00YHTA00 |
| PIN_LOCATE | KYD-MC132-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NPM 235CS NOZZLE | N610043815AA |
| HELICAL SPRING | N210068065AA |
| NPM 240C NOZZLE | N610062681AD |
| SEAL | KYB-M702B-000 |
| KIC ON BOARD | 6-10 CHANEL |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY,LEVER | KYM-M8648-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GEAR | KYD-MC21U-000 |
| BLOCK L3 | KYB-M960C-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| GEAR | 4-719-921-02 |
| TAIL PIVOT | P/N:0740C-0109 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| PIN,HINGE | KYB-M3T2Y-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| MOTOR | KYA-M700R-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ASSY,LEVER | KYM-M864H-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BELT_TIMING | KYA-M914W-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| PCBA FIXTURE | FC150-130-60 |
| BELT | 6*3080*0.9 mm |
| SPRING_COMP | KYD-MC3T-000 |
| LEVER | KYB-M3T01-000 |
| FILTER | K46-M8527-COX |
| NOZZLE(HB04C) | KYB-M7721-100 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| 933 NOZZLE | 00346523-03 |
| GEAR | KYU-M868B-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NPM H16 SENSON | N510054833AA |
| LEVER | KYK-M861V-000 |
| SONY1000 FILTER | 4-761-920-01 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| BELT TIMING | KYA-M9152-000 |
| GEAR | KYD-MC20K-00 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SPRING_COMP | KYB-M91CS-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GUIDE,LINEAR | KYF-M867P-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| POWER SUPPLY | 11632XA |
| SPRING_COMP | KYD-MC129-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| 234F NOZZLE | 45466931 |
| RT BELT | 3-212-264-01 |
| ASSY GEAR | KYD-MC211-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ARM STEEL | N210007284AB |
| FAN | 1204KL-04W-B59 |
| BOLT-HEX-SCT | 90990-01J115 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| GEAR | KYD-MC153-00 |
| BELT | 00334936S01 |
| BELT | 6*3080*0.9 mm |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| GEAR | KYK-M864C-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| SEAL | KYT-M862W-000 |
| NPM 235C NOZZLE | N610043814AD |
| GREASE FOR PANASONIC | N510048188AA |
| B-234 NOZZLE | 47561103-B-234 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| COVER(RB) | KYD-MC10L-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| GUIDE | KYD-MC11T-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| GEAR | KYD-MC424-000/223E0481 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| DSP-2008K SQUEEGE | L:20CM |
| ACCESSORY,SV | KYL-M861C-000 |
| 935 NOZZLE | 00346524-03 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| SENSOR,PELEC | KYK-M86DE-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| CASE-CONN | KYK-M860Y-000 |
| 938 NOZZLE | 00322592-05 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| DD MOTOR | KYF-M860E-000 |
| CPK JG0250 | CPK JG0250 |
| NPM 230C NOZZLE | N610040784AD |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| DISK | KYB-M3T1A-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| TIMING BELT | KYB-M919E-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| WASHER | 92902-03100 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| PIN-GAUGE | KXF00YHUA00 |
| SONY NOZZLE | CF25200 |
| ASSY_CABLE | KYL-M86NC-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| NPM FILTER | N610097899AA |
| CASE-CONN | KYF-M860Y-000 |
| Fuji Packing | PH00991 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| PIPE FITTING | 630 048 4656 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| VALVE | 4-187-212-01 |
| VALVE | 2-673-684-01 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| PCB-MOUNT | KYK-M861W-000 |
| CORD,BCR | KYF-M86NC-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| NOZZLE | HG53G |
| GXH SPECIAL NOZZLE | 13053 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| TOOL | N510031628AA |
| NPM 226CS NOZZLE | N610040783AB |
| NPM H16 SHAFT | N510064335AA |
| POWER SUPPLY | 1-474-020-11 |
| CYLINDER | KYL-M869A-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NOZZLE_HG82C | KYA-M7708-000 |
| UNIT,I/O | KYL-M86LV-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| I/O CABLE,WIDE | 0938A-1007 |
| MACHINE SCREW | KYD-MC14G-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| NOZZLE(FF01) | KYB-M77F1-000 |
| NPM X479 VALVE | N510054843AA |
| LEVER | KYB-M3T33-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 360F NOZZLE | 45466917 |
| SPRING COMP | KYD-MC13T-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| FUSE | KYL-M86KH-000 |
| ETC MOTOR | PK2K93S-2D |
| POGO BLOCK | 0738A-0029 |
| FFU | MX--575-A |
| SHAFT ASSY. | KYF-M864U-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| HOLDER | KYB-M702F-000/0916DK2D |
| Encoder Read Head For Universal | 49566101 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY_GEAR | KYD-MC412-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| Fuji Filter | AA1FZ04 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| COUPLING | KYB-M702C-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BUCK_UP_PIN | KYA-M3802-000 |
| COVER | KYK-M86RD-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| BRACKET | KYL-M86KD-000/211FC709 |
| LEVER | KYK-M86LV-000 |
| WASHER | 92902-03200 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| LEVER | KYB-M3T21-000 |
| PIN_LOCATE | KYD-MC137-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SPRING COMP | KYD-MC422-000 |
| 904 NOZZLE | Y074-V904-0015 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| SPRING | P/N:0730C-0252 |
| CAM FOLLOWER | KYB-M704A-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ASSY,GEAR | KYM-M862C-000 |
| NPM 230CS NOZZLE | N610040788AD |
| GUIDE,LINEAR | LWHD12X3 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| YG12F BELT | KHY-M9129-00 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| WASHER | 90990-37J010 |
| VALVE | SY3240-5LZD |
| GT38080 FEEDER | GT38080 FEEDER |
| HOLDER | KYB-M701R-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| COVER(LB) | KYM-M8657-000 |
| GREASE | N990PANA-023 |
| GERA(HASUBA) | KYD-MC131-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| FEEDER | GD38080 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SONY E1000 FILTER | 4-761-920-01 |
| PLATE | N610014970AE |
| COVER | KYM-M860X-000 |
| 937 NOZZLE | 00322591-06 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| WASHER | KYD-MC22H-00 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| SDD Hard Disk | N610059692AA |
| BELT | 44548605 |
| PIN,HINGE | KYL-M860R-000 |
| COUPLING | KYK-M86AW-000 |
| YG12 BELT | KHY-M9129-10 |
| BLOCK | KYA-M7027-000 |
| COVER ASSY | X-4700-067-4 |
| PIN_HINGE | KYD-MC41U-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| SONY NOZZEL AF12082 | AF12082 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
