Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301275468 / 211D9642 / KYK-M8618-000 PLATE Hitachi Smt Spare Parts for Feeder
| Part No | 630 127 5468 / 211D9642 / KYK-M8618-000 |
| Part Name | PLATE |
| Condition | Original news or Compatible new |
| Material | steel |
| Usage | Feeder Machine |
| Type | Hitachi SMT part |
Hot sale stock list:
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| COUPLING | KYK-M86AW-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| HNS,CORD | KYL-M8621-000 |
| COVER(RB) | KYM-M8612-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| 360F NOZZLE | 45466917 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE_HG33C | KYA-M7703-000 |
| ASSY GRIP | KYD-MC21H-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| GXH-1 FILTER | KYL-M860S-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| TOOL | N510031628AA |
| ROCK | 2-149-675-01 |
| POWER SUPPLY | 11632XA |
| LEVER | KYK-M861V-000 |
| BELT_TIMING | KYA-M914W-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| BELT | 6*3080*0.9 mm |
| GEAR | KYD-MC424-000/223E0481 |
| SLIP RING | KYB-M7027-000 |
| LEVER | KYB-M3T33-000 |
| PCBA FIXTURE | FC150-130-60 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| SPRING COMP | KYD-MC422-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| CORD,BCR | KYF-M86NC-000 |
| GEAR | KYU-M868B-000 |
| 937 NOZZLE | 00322591-06 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SPRING_COMP | KYD-MC129-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BELT | N510065133AA |
| PIN_LOCATE | KYD-MC132-000 |
| BELT | 00334936S01 |
| NOZZLE | HG53G |
| PULLEY_TIMING | KYB-M91AL-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| LIGHTING_UNIT | KYB-M700T-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| ASSY_LEVER | KYD-MC212-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| SPRING_COMP | KYB-M91CS-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NPM 185 NOZZLE | N610070338AB |
| SENSOR,PELEC | KYL-M86HL-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY,LEVER | KYM-M864H-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ASSY_SHAFT | KYF-M8651-000 |
| COUPLING | KYB-M7116-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| BM02 NOZZLE | BM02 |
| PIN,HINGE | KYB-M3T31-000 |
| COVER(LB) | KYM-M8657-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NOZZLE(VC74) | KYK-M7725-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN_HINGE | KYD-MC42S-000 |
| 904 NOZZLE | Y074-V904-0015 |
| NPM H16 SENSON | N510054833AA |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| PLATE | N610014970AE |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| WASHER | 90990-37J010 |
| FFU | MX--575-A |
| GRIP | KYD-MC109-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| CASE-CONN | KYK-M860Y-000 |
| SPRING | P/N:0730C-0252 |
| DISK | KYB-M3T1A-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| SONY1000 FILTER | 4-761-920-01 |
| SENSOR,PELEC | KYL-M8609-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| FEEDER CABLE | KYL-M869D-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| PIN-GAUGE | KXF00YHUA00 |
| BELT | N510021326AA |
| NOZZLE(FA06) | KYB-M77F6-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| GREASE | N990PANA-023 |
| Fuji Packing | PH00991 |
| SONY NOZZLE | CF25200 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| UNIT,I/O | KYL-M86LV-000 |
| GEAR | KYD-MC23C-00 |
| ASSY_GEAR | KYD-MC11A-000 |
| MOTOR_DC | KYD-MC410-000 |
| BELT | 6*3080*0.9 mm |
| GUIDE | KYD-MC11T-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BOLT-HEX-SCT | 90990-01J115 |
| SPRING_COMP | KYD-MCN41-000 |
| FEEDER | GD38080 |
| YG12F BELT | KHY-M9129-00 |
| CPK JG0250 | CPK JG0250 |
| BUSH,BEARING | KYB-M3T3S-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| NPM 230C NOZZLE | N610040784AD |
| POWER SUPPLY | 1-474-020-11 |
| CAM FOLLOWER | KYB-M704A-000 |
| BOTTON | ZB6-EB3B |
| ROLLER(B) | KYK-M86EM-000 |
| VALVE | SY3240-5LZD |
| WASHER | KYD-MC22H-00 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| COUPLING | KYB-M702C-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| LEVER | KYK-M86LV-000 |
| CASE-CONN | KYF-M860Y-000 |
| GEAR | 4-719-921-02 |
| ASSY_CABLE | KYL-M86NC-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| SONY NOZZEL AF12082 | AF12082 |
| I/O CABLE,WIDE | 0938A-1007 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| NPM 235C NOZZLE | N610043814AD |
| BLOCK | KYA-M7027-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM X479 VALVE | N510054843AA |
| BLOCK | KYF-M867D-000 |
| NPM 226CS NOZZLE | N610040783AB |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| BUCK_UP_PIN | KYA-M3802-000 |
| LEVER | KYB-M3T21-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| CYLINDER | KYL-M869A-000 |
| ASSY,LEVER | KYM-M8648-000 |
| Encoder Read Head For Universal | 49566101 |
| NOZZLE_HG52C | KYA-M7705-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| 935 NOZZLE | 00346524-03 |
| SENSOR,PELEC | KYK-M86DE-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| GEAR | KYD-MC21U-000 |
| SPRING COMP | KYD-MC13T-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SONY NOZZEL | AF10071 |
| PIPE FITTING | 630 048 4656 |
| LEVER | KYB-M3T0M-000 |
| GREASE FOR PANASONIC | N510048188AA |
| MICRO METER | 350-251-30 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SDD Hard Disk | N610059692AA |
| HOLDER | KYB-M702F-000/0916DK2D |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| MOTOR | KYA-M700R-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| 340F NOZZLE | 45466934 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| FAN | 1204KL-04W-B59 |
| UNIT-DRIVER | KYK-M861A-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| WASHER | 92902-03100 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| LINE-SENSOR | KYF-M8607-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BRACKET | KYL-M86KD-000/211FC709 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| 933 NOZZLE | 00346523-03 |
| PIN-GAUGE | KXF00YHTA00 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| MOTOR_DC | KYD-MCN2G-000 |
| BLOCK L3 | KYB-M960C-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| VALVE | 2-673-684-01 |
| NOZZLE_HV14C | KYA-M7714-000 |
| B-234 NOZZLE | 47561103-B-234 |
| PCB-MOUNT | KYK-M861W-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| SEAL | KYB-M702B-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PLATE | KYA-M3804-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| POGO BLOCK | 0738A-0029 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| SEAL | KYB-M704E-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| ARM STEEL | N210007284AB |
| P_RCG_SCOPE | KYB-M730B-000 |
| NPM H8 SENSON | N510048691AA |
| SHAFT ASSY. | KYF-M864U-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| HV31 NOZZLE | KYL-M7718-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| TIMING BELT | KYB-M919E-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BELT | 44548605 |
| SEAL | KYT-M862W-000 |
| ETC MOTOR | PK2K93S-2D |
| HELICAL SPRING | N210068065AA |
| WASHER | 92902-03200 |
| NPM FILTER | N610097899AA |
| GERA(HASUBA) | KYD-MC131-000 |
| NPM H16 SHAFT | N510064335AA |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| DD MOTOR | KYF-M860E-000 |
| Fuji Filter | AA1FZ04 |
| SONY MOTHER BOARD | 1-797-651-12 |
| PIN,HINGE | KYD-MC41S-000 |
| ASSY GEAR | KYD-MC211-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| FUSE | KYL-M86KH-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| GEAR | KYD-MC153-00 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NPM 235CS NOZZLE | N610043815AA |
| PIN_LOCATE | KYD-MC21Y-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| NPM 240C NOZZLE | N610062681AD |
| 1220 NOZZLE | 51305323 |
| COVER | KYM-M860X-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BELT | N510060977AA |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| LEVER | KYB-M3T01-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| GEAR | KYD-MC23C-000/6301352305 |
| GXH SPECIAL NOZZLE | 13053 |
| VALVE | SY3120-MZD-C6-F2 |
| NPM 230CS NOZZLE | N610040788AD |
| LEVER | KYB-M3T22-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SPRING_COMP | KYD-MC3T-000 |
| SLIP RING | KYB-M7027-000 |
| HOLDER | KYB-M701R-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| ASSY,GEAR | KYM-M862C-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE_HV13C | KYA-M7713-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| COVER(RB) | KYD-MC10L-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| RT BELT | 3-212-264-01 |
| TAIL PIVOT | P/N:0740C-0109 |
| PIN_LOCATE | KYD-MC137-000 |
| YG12 BELT | KHY-M9129-10 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| FILTER | K46-M8527-COX |
| DSP-2008K SQUEEGE | L:20CM |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| COVER ASSY | X-4700-067-4 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| 234F NOZZLE | 45466931 |
| NOZZLE_HV19C | KYA-M7719-000 |
| GEAR | KYK-M864C-000 |
| GUIDE,LINEAR | LWHD12X3 |
| GEAR | KYD-MC20K-00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| KIC ON BOARD | 6-10 CHANEL |
| VALVE | 4-187-212-01 |
| PIN,HINGE | KYL-M860R-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| BELT TIMING | KYA-M9152-000 |
| BALL | 4-719-920-01 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| SENSOR | KYF-M8681-000 |
| 938 NOZZLE | 00322592-05 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| COVER | KYK-M86RD-000 |
| DRIVER | N510002593AA |
| GT38080 FEEDER | GT38080 FEEDER |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
