Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M701R-000 / 216B1811 HOLDER Hitachi Smt Spare Parts
| Part No | KYB-M701R-000 / 216B1811 |
| Part Name | HOLDER |
| Condition | Compatible new |
| Material | Plastic |
| Usage | Hitachi G5 G5S F8 F8S G5SII machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| 933 NOZZLE | 00346523-03 |
| CASE-CONN | KYK-M860Y-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| Fuji Filter | AA1FZ04 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BLOCK L3 | KYB-M960C-000 |
| HELICAL SPRING | N210068065AA |
| NOZZLE(FA05) | KYB-M77F5-000 |
| COUPLING | KYK-M86AW-000 |
| CORD,BCR | KYF-M86NC-000 |
| GEAR | KYK-M864C-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BELT | N510021326AA |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| FILTER | K46-M8527-COX |
| NOZZLE_HV13C | KYA-M7713-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| ASSY,LEVER | KYM-M8648-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| COVER | KYM-M860X-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| PIN_LOCATE | KYD-MC21Y-000 |
| CYLINDER | KYL-M869A-000 |
| WASHER | 92902-03100 |
| DSP-2008K SQUEEGE | L:20CM |
| SLIP RING | KYB-M7027-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE_HG52C | KYA-M7705-000 |
| GEAR | KYD-MC20K-00 |
| COVER ASSY | X-4700-067-4 |
| ASSY_GEAR | KYD-MC40F-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| HNS,CORD | KYL-M8621-000 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| NOZZLE | HG53G |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY_LEVER | KYD-MC212-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| B-234 NOZZLE | 47561103-B-234 |
| 935 NOZZLE | 00346524-03 |
| SDD Hard Disk | N610059692AA |
| FFU | MX--575-A |
| BLOCK | KYA-M7027-000 |
| GEAR | KYD-MC424-000/223E0481 |
| BELT | N510060977AA |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| KIC ON BOARD | 6-10 CHANEL |
| SONY NOZZEL | AF10071 |
| ASSY,GEAR | KYM-M862C-000 |
| PIN_HINGE | KYD-MC41U-000 |
| SLIP RING | KYB-M7027-000 |
| POWER SUPPLY | 11632XA |
| MICRO METER | 350-251-30 |
| ARM STEEL | N210007284AB |
| SONY MOTHER BOARD | 1-797-651-12 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| NPM 235CS NOZZLE | N610043815AA |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| COVER(RB) | KYM-M8612-000 |
| DD MOTOR | KYF-M860E-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MOTOR_DC | KYD-MC410-000 |
| RT BELT | 3-212-264-01 |
| GEAR | 4-719-921-02 |
| NOZZLE_HG82C | KYA-M7708-000 |
| BOTTON | ZB6-EB3B |
| YG12 BELT | KHY-M9129-10 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| SENSOR,PELEC | KYL-M86HL-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BELT_TIMING | KYA-M914W-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| PIN,HINGE | KYD-MC41S-000 |
| NPM 240C NOZZLE | N610062681AD |
| 904 NOZZLE | Y074-V904-0015 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| ETC MOTOR | PK2K93S-2D |
| GUIDE,LINEAR | LWHD12X3 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| GXH SPECIAL NOZZLE | 13053 |
| LEVER | KYB-M3T21-000 |
| VALVE | SY3240-5LZD |
| BUSH,BEARING | KYB-M3T3S-000 |
| PIN_HINGE | KYD-MC42S-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ASSY_CABLE | KYL-M86NC-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GEAR | KYD-MC21U-000 |
| POWER SUPPLY | 1-474-020-11 |
| SPRING_COMP | KYD-MCN41-000 |
| POGO BLOCK | 0738A-0029 |
| BELT | 6*3080*0.9 mm |
| NOZZLE_HV19C | KYA-M7719-000 |
| VALVE | 4-187-212-01 |
| YG12F BELT | KHY-M9129-00 |
| FAN | 1204KL-04W-B59 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| SONY NOZZEL AF12082 | AF12082 |
| TAIL PIVOT | P/N:0740C-0109 |
| NOZZLE(VC74) | KYK-M7725-000 |
| PIN-GAUGE | KXF00YHUA00 |
| TIMING BELT | KYB-M919E-000 |
| PIN-GAUGE | KXF00YHTA00 |
| Fuji Packing | PH00991 |
| WASHER | KYD-MC22H-00 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BELT | 6*3080*0.9 mm |
| LEVER | KYB-M3T0M-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| TOOL | N510031628AA |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BOLT-HEX-SCT | 90990-01J115 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| NPM X479 VALVE | N510054843AA |
| NPM FILTER | N610097899AA |
| NPM 185 NOZZLE | N610070338AB |
| BLOCK | KYL-M86KC-000/211G5472 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| NPM 230CS NOZZLE | N610040788AD |
| SONY NOZZLE | CF25200 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SPRING_COMP | KYD-MC3T-000 |
| SPRING_COMP | KYB-M91CS-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| LEVER | KYB-M3T22-000 |
| 938 NOZZLE | 00322592-05 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| SPRING COMP | KYD-MC422-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| WASHER | 92902-03200 |
| CAM FOLLOWER | KYB-M704A-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| PLATE | KYA-M3804-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SPRING COMP | KYD-MC13T-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| BELT | 00334936S01 |
| LEVER | KYB-M3T33-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SEAL | KYT-M862W-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| COVER(RB) | KYD-MC10L-000 |
| WASHER | 90990-37J010 |
| FEEDER | GD38080 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MOTOR_DC | KYD-MCN2G-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| UNIT,I/O | KYL-M86LV-000 |
| GEAR | KYU-M868B-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BELT | 44548605 |
| 1220 NOZZLE | 51305323 |
| VALVE | SY3120-MZD-C6-F2 |
| P_RCG_SCOPE | KYB-M730B-000 |
| VALVE | 2-673-684-01 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| PLATE | N610014970AE |
| 937 NOZZLE | 00322591-06 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| LINE-SENSOR | KYF-M8607-000 |
| BM02 NOZZLE | BM02 |
| LEVER | KYB-M3T01-000 |
| ASSY GRIP | KYD-MC21H-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| LEVER | KYK-M86LV-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| COUPLING | KYB-M7116-000 |
| CPK JG0250 | CPK JG0250 |
| ROCK | 2-149-675-01 |
| GEAR | KYD-MC23C-00 |
| PIN,HINGE | KYL-M860R-000 |
| GEAR | KYD-MC153-00 |
| SHAFT ASSY. | KYF-M864U-000 |
| COVER | KYK-M86RD-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| COUPLING | KYB-M702C-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| PIN_LOCATE | KYD-MC132-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| BELT | N510065133AA |
| GXH-1 FILTER | KYL-M860S-000 |
| Encoder Read Head For Universal | 49566101 |
| CASE-CONN | KYF-M860Y-000 |
| NPM 235C NOZZLE | N610043814AD |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NPM 230C NOZZLE | N610040784AD |
| GRIP | KYD-MC109-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| GUIDE | KYD-MC11T-000 |
| MOTOR | KYA-M700R-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| DISK | KYB-M3T1A-000 |
| HOLDER | KYB-M701R-000 |
| 234F NOZZLE | 45466931 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| COGNEX BOARD | KYK-M86PW-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| GREASE FOR PANASONIC | N510048188AA |
| LEVER | KYK-M861V-000 |
| SPRING | P/N:0730C-0252 |
| SENSOR-PELEC | KYK-M861Y-000 |
| BALL | 4-719-920-01 |
| FUSE | KYL-M86KH-000 |
| NPM 226CS NOZZLE | N610040783AB |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT TIMING | KYA-M9152-000 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| SEAL | KYB-M704E-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY_GEAR | KYD-MC412-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM H8 SENSON | N510048691AA |
| LEVER(SUP) | KYD-MC20D-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| PCB-MOUNT | KYK-M861W-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ASSY,LEVER | KYM-M864H-000 |
| GREASE | N990PANA-023 |
| ASSY_TENSION | KYD-MC21N-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PIN_LOCATE | KYD-MC137-000 |
| FEEDER CABLE | KYL-M869D-000 |
| BLOCK | KYF-M867D-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| NPM H16 SHAFT | N510064335AA |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| BUSH,BEARING | KYB-M3T3R-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| GERA(HASUBA) | KYD-MC131-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| HNS,LIGHTING | KYF-M861W-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| 360F NOZZLE | 45466917 |
| UNIT_DRIVER | KYK-M860F-000 |
| SENSOR | KYF-M8681-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| SPRING_COMP | KYD-MC129-000 |
| SEAL | KYB-M702B-000 |
| ASSY GEAR | KYD-MC211-000 |
| 340F NOZZLE | 45466934 |
| GT38080 FEEDER | GT38080 FEEDER |
| LIGHTING_UNIT | KYB-M700T-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| COVER(LB) | KYM-M8657-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ROLLER(B) | KYK-M86EM-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| DRIVER | N510002593AA |
| NOZZLE(BA06) | KYB-M77A6-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| PIPE FITTING | 630 048 4656 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
