Home Companies Hangzhou Haina Environmental Protection Tech Co., Ltd.

Reverse Osmosis System Ro Plant Membrane 8 Inch Bw 8040

Active Member

Contact Us

[China]

Address: No. 2 Xiuyan Road, Hangzhou City, Zhejiang Province

Contact name:Robert Wang

Hangzhou Haina Environmental Protection Tech Co., Ltd.

Reverse Osmosis System Ro Plant Membrane 8 Inch Bw 8040

Country/Region	china
City & Province	hangzhou zhejiang

Product Details

Industrial RO Water Purifier 8inch Reverse Osmosis Membrane for Water RO Plant

Reverse osmosis membranes can be used for a variety of fluid separations. Currently, the most widely used reverse osmosis membranes are cross-linked aromatic polyamide reverse osmosis membranes. Usually, m-phenylenediamine and trimesoyl chloride are used for interfacial polycondensation on the surface of porous polysulfone supported membranes. A polyamide layer is formed. The polyamide layer obtained by the reaction is the key to influence the water permeability and salt retardation rate. Therefore, focusing on the interfacial polycondensation reaction and optimizing the polyamide layer in order to obtain a reverse osmosis membrane with large flux and high salt removal rate has always been the direction of many researchers.

LP brackish water series membrane elements have the characteristics of low-pressure operation, high water production and good desalination performance. It is suitable for high-purity water equipment in the electronics and power industries, industrial water of various scales, and water for various industries such as boiler feed water in power plants.

Model Number	Description	BW-8040-LP
Performance & Test Condition	The Desalination Rate %	99.5%
	Water Rate GDP	10500
	The Test pressure	225psi
	Test solution Temperature	25± 1ºC
	Test Solution Concentration NaCl	2000ppm
	Test solution pH value	6.5-7.5
	Recovery Of Single-Branch Membrane Element	15%
	Feed water SDI	5

Operating Limit:

Maximum Operating Temperature	113ºF(45ºC)
Maximum Working Pressure	600psi(41.0 bar)
The high pressure drop	15psi (1.0bar)
Continuously operating PH range a	3-10
Short wash PH range (30min) b	2-12
Maximum feed water SDI	SDI 5
Tolerance Of Free Chlorine	<0.1ppm
Maximum pressure drop for single membrane element	15psi(0.1Mpa)

When PH is above 10, the Maximum Temperature of Continuous Operation is 35ºC.
Under certain conditions, the presence of free chlorine and other oxidants in the water may cause serious membrane damage, which doesn't belong to product warranty range.

FAQ:

Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.

Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.

Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.

Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.

Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.