Home Companies Shandong Haiying Wuzhou Instrument Co., Ltd.

Sturdy Safety Medical Laboratory Centrifuge Maximum Centrifugal Force 2600 Xg

Active Member

Contact Us

[China]

Address: Room 309, Huineng Building, 38 Huaneng Road

Contact name:yisean

Shandong Haiying Wuzhou Instrument Co., Ltd.

Sturdy Safety Medical Laboratory Centrifuge Maximum Centrifugal Force 2600 Xg

Country/Region	china

Product Details

Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low Speed Centrifuge

TD4 Low Speed Centrifuge Application Scope:

It has high safety, excellent quality, and high cost performance. It is a conventional equipment for the separation and preparation of suspended solids and is a necessary laboratory centrifugal separation basic instrument for various laboratories, hospitals at all levels, and universities.

The TD4 desktop low-speed centrifuge is suitable for experimental scientific research units such as biochemistry, medicine, pharmacy, clinical trials, food and environmental protection. It is a conventional equipment for separation and preparation of suspended liquids.

Host technical parameters
product name	Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low Speed Centrifuge
Maximum capacity	8×20 ml
power	120W
power supply	AC220V 50Hz
Weight (with rotor)	18 Kg
Dimensions (length×width×height)	380×260×310 mm

Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low Speed Centrifuge Product Introduction:

TD4 low-speed table top centrifuge is a machine that uses centrifugal force to separate the components in the mixture of liquid and solid particles or liquid and liquid. The centrifuge is mainly used to separate the solid particles in the suspension from the liquid, or to separate the two incompatible liquids in the emulsion with different densities (for example, separating cream from milk); it can also be used to remove Liquids in wet solids, such as drying wet clothes with a washing machine; special ultra-velocity tube separators can also separate gas mixtures of different densities; using the characteristics of different density or particle size solid particles in the liquid to settle at different speeds, and some sedimentation The centrifuge can also classify solid particles according to density or particle size.

TD4 Low Speed Centrifuge Common failure analysis

After the power is turned on, the control panel displays normal, and the cooling fan works normally. When the start button is pressed, the intermediate relay works and the centrifuge does not work. According to the analysis of the fault phenomenon, the power supply part and the control part should be normal, and the fault should be at the line from the control board to the motor, the carbon brush and the motor. Turn on the centrifuge, use a multimeter to measure the continuity of the line from the control board to the carbon brush, and then measure that the carbon brush does not conduct when it reaches the motor rotor. Carefully observe the poor contact between the carbon brush and the motor rotor. Remove the carbon brush and find that it has been used for too long. Caused by too short. Replace with a new carbon brush, troubleshooting. This kind of failure is a common failure of the centrifuge, and the carbon brushes should be replaced regularly to avoid the above failures.