Active Member
|
[China]
Address: 6F, Building 15, Xia'nan Third Industrial Zone, Shangcun Community, Gongming Street, Guangming District,Shenzhen ,518132,China
Contact name:Susie
Shenzhen Amydi-Med Electronics Tech Co., Ltd. |
|
Adhesive Spo2 Sensors TPU Material 6 Pin Connector
| cable's material | PVC Jacket |
| Cable Diameter | 3.2mm |
| cable's Length | 0.9M or according to customer's requirement |
| MOQ | 50pcs |
| Warranty | 0 Month |
Main technical parameters
Main technical parameters | |
Emitting light waven length | 660±5nm |
Absorbed light wavelength | 905±5nm or 940±5nm |
SpO2 testing range | 70%-100% |
SpO2 testing precision | ±1% in 90%~100% |
±2% in 80%~89% | |
±3% in 70%~79% | |
Testing range of pulse velocity | 30bpm~245bpm |
Testing precision of pulse velocity | 30bpm~59bpm,±1bpm |
60bpm~149bpm,±2bpm | |
150bpm~245bpm,±3bpm | |
Working environment requirements | |
Environment temperature | 5°C~40°C |
Relative humidity | ≤80% |
Atmospheric pressure | 700hPa~1060hPa
|
Sensor Type :
Adult Non-woven
Adult Foam
Adult/Neonate sponge
Adult Transpore
Pediatric Non-woven
Pediatric Foam
Infant Non-woven
Infant Foam
Adult/Neonate non-woven
Neonate Non-woven
Adult/neonate foam
Neonate Foam
Why Choose us:
1. Our company established in 2009, we have experience more than 10 years in medical area.
Got a lot of good feedback from many customers.
2. Amydi-med Medical have20 product lines and 1 dust-free workshop,
Factory area is 3000sqm,around 100 workers,if we can cooperate with you ,
you don't worry about delivery time,it can make you get more orders from your customers
3. we can supply OEM service to you ,make your LOGO's label to build your brand .
4. After-sales service ,send back all bad products to us or we replace new products to you directly.
FAQ:
1. Are you manufacturer?
Yes, we are.
2. Can you offer OEM service?
Yes, we can.
3. How do you control your quality?
Firstly, we need to test each batch, After we get raw material from supplier,
Secondly, we need to test 2 times one by one while we are producing.
Thirdly, we will test again one by one after we finish production.
Finally, we will spot-check after packing.
If you want to know more about DS-100A pediatric finger tip spo2 sensor, Please don’t hesitate to contact us!
We will reply you once we receive your message.
