Active Member
|
[China]
Address: 2nd Floor, Building 10, Innovation and Entrepreneurship Center, No.9 Chuanqi West Road, Jiuhua Economic Development Zone, Xiangtan City, Hunan Province, China
Contact name:Cathy Zhou
Hunan Zhongliankang Medical Technology Co.,Ltd. |
|
|
Product Name
Portable LED Screen ABS Plastic Household Blood Oxygen Saturation Monitor Fingertip Pulse Oximeter
Function Specification
| Display Information | Display Mode |
| The Pulse Oxygen Saturation(SpO2) | LED |
| Pulse Rate(PR) | LED |
| Pulse Intensity (bar -graph) | LED |
| Pulse wave | LED |
| SpO2 Parameter Specification | |
| Measuring range | 0%~-100%, (the resolution is 1%). |
| Accuracy | 70%~100%±2%, Below 70% unspecified. |
| Optical Sensor | Red light (wavelength is 660nm) Infrared (wavelength is 880nm) |
| Pulse Parameter Specification | |
| Measuring range | 30bpm~250bpm (the resolution is 1 bpm) |
| Accuracy | ±2bpm or±2% select larger |
| Pulse Intensity | |
| Range | Continuous bar-graph display, the higher display indicate the strong pulse |
| Battery Requirement | |
| 1.5V (AAA size) alkaline batteries x 2 or rechargeable battery | |
| Battery Useful Life | |
| Two batteries can work continally for 20 hours | |
| Dimensions and Weight | |
| Dimensions | 57(L) x 31(W) x 32(H) mm . |
| Weight | About 50g (with the batteries) |
Features
1,EASY TO USE: Our pulse monitor is easy to use and has an efficient One
Button Operation. Our SPO2 Sensor will spot check and display in real time
SpO2, PR, Pulse bar graph which great for checking your pulse signal strength
2,LUXURY AND RELIABILITY: Our accurate dual color oximeter has SpO2
waveforms in 4 directions, 6 display modes, and 10 levels of adjustable brightess.
Comes with a battery-low indicator
3,OUT OF BOX READY: Our portable oxygen saturation machine comes with
Instruction manual, 2 AAA alkaline batteries, Neck lanyard (detachable and
adjustable length) you'll be ready to use your portable oxygen sensor right out
of the box
4,SUITABLE FOR ALL AGES: Our oxygen saturation finger monitor can be
used as a pediatric pulse oximeter for kids and children as well as a blood
oxygen monitor for adults
NOTE: This device is for Sports and Aviation use only and not intended for
medical use. It's great for mountain climbers, bikers, trainers, aviators, and
general sport enthusiasts to spot check SpO2 on the fly.
Troubleshooting
| Trouble | Possible Reason | Solution |
The SpO2 and Pulse Rate can not be displayed normally
| 1. The finger is not properly positioned. 2. The patient's SpO2 is too low to be detected.
| 1. Place the finger properly and try again. 2. Try again; Go to a hospital for a diagnosis if you are sure the device works all right. |
The SpO2 and Pulse Rate are not displayed stably
| 1. The finger is not placed inside deep enough. 2. The finger is shaking or the patient is moving. | 1. Place the finger properly and try again. 2. Let the patient keep calm
|
The device can not be turned on
| 1. The batteries are drained or almost drained. 2. The batteries are not inserted properly. 3. The malfunction of the device. | 1. Change batteries. 2. Reinstall batteries. 3. Please contact the local service center.
|
The display is off suddenly
| 1. The device will power off automatically when it gets no signal within 5 seconds. 2. The batteries are almost drained. | 1. Normal. 2. Change batteries.
|
