Active Member
|
Address: 2F, Building 15, Longbi Industry Park, Dafa Road, Bantian, Longgang District, 518129, Shenzhen, P.R.China
Phone: 86-755-29340062
Contact name:Roger Chen
Fiberroad Technology Co., Limited |
|
|
Fiber Media Converter Card 10/100/1000Base-TX to 1000Base-FX SFP
10/100/1000Base-TX to 1000Base-FX SFP Managed Media Converter Card can be used in 16-slot multifunctional management system, which is a Ethernet and SDH transmission equipment, support mutiple services including managed media converter card, OEO Converter card, 1+1 protection switching card, CWDM/DWDM MUX/DEMUX Card, etc. supports protocols like SNMP, WEB, CONSOLE and TELNET ,with a strong management function , and operate easily to meet different customer's requirement.
Fiber Media Converter Card Features
- Supporting 10/100/1000M, full/half duplex autosensing
- Supporting auto-MDI/MDIX
- Supporting SFP transceiver, 1*9 transceiver optional
- Support SFP DMI(Diagnostic Monitoring Interface) function
- Supporting 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled
by ITUT
- Max. 2046 bytes packet at store-and-forward mode; Max. 9K bytes
packet at cut-through
- Rate Limit function, 64Kbps
- Supporting Loopback, precisely locating the failure, convenient
for link test
- Supporting LFP, quickly locates the failure
- Supporting remote power off alarming
- Economical management function within bandwidth, supporting
802.3ah and TS 1000
- With powerful network management function, supporting WEB and
SNMP
- Supporting hot plug
- Supporting Remote management
- Easy installation with complete LED indicators for working
situation
- Supporting 2U chassis (16 slots) and standalone use
Fiber Media Converter Card Specification
| Transmission Distance | Twisted-pa: 100M (standard CAT5/CAT5e cable) SFP: Distance depend on plug-in Fiber Tranceiver |
| Forwarding Mode | Store-and-forward or Pass-Through |
| Forwarding Frame Length | 2046Bytes |
| LFP mode | Support |
| DIP Switches | DIP-1: Copper forced mode/auto-negotiation mode DIP-2: Copper speed 100Mbps/1000Mbps DIP-3: Copper Forwarding mode DIP-4: LFP mode |
| Software Features | Supports LFPT (Link Fault Pass Through) Supports Digital Diagnostic Monitor Interface (DDMI) for SFP Web/SNMP/EMS management Supports OAM/IP in-band management Ingress/Egress Bandwidth control per port Supports 16 IEEE 802.1Q Tag VLAN Group SNMP alarm trap for power loss and port link down Remote loop back test Dying gasp (remote power failure detection) |
| Power Requirement | Operating Voltage DC 5V Rated Current: 0.5A Power Consumption: Full-load<4W |
| Environmental Requirement | Operating Temperature: 0℃~50℃ Storage Temperature : -10℃~ 70℃ Relative Humidity: 5%~95% MTBF: 56,000 h Enclosure: Metal |
| Dimensions | 120mm(H)×90mm(D)× 22mm(W) |
| Weight | 100g |
| Warranty | 1 Year |
| Emissions | FCC Class A, CE Class A |
Dimensions
Ordering Information
| P/N | Description | X | X | X | X |
| FR-6103-XXXX | 10/100/1000Base-TX to 1000Base-FX Media Converter Card | S: Duplex Single-mode M: Duplex Multi-mode B: Simplex Single-mode SFP: SFP Slot | 3: TX 1310nm 4: TX 1490nm 5: TX 1550nm 8: TX 850nm | S: SC F: FC T: ST L: LC | 05: 550M 2: 2KM 20: 20KM 40: 40KM |
| FR-6103R-XXXX | 10/100/1000Base-TX to 1000Base-FX Media Converter (Remote Standalone) |
