Studding outlet flanges Flat Bottom Pressure Class 150 with the Material SA105N

Product Description:

Stud outlet flanges are designed for installation inside and outside of containers and storage tanks. The curve of the outlet should be fitted to the curve of the shell, head or cone. Stud outlets range in size from 1/2 "to 24" and pressure ratings from 150# to 2500#. Stud outlets can be provided flat as well as contoured bottom to fit the od or id of the shell, head or cone. The neutralizer from the center line of the container/head can also be accommodated.

Material: The most commonly used thread socket is A/SA-105N. They can also be made of various stainless steel and alloy materials.

Thickness: The standard thickness of all bolt exports above is the minimum thickness required for the SME Section I of the VIII Section Part I. It is important to note that each individual application should analyze appropriate thickness.

Drilling and attack wire: Except for other regulations, the exit of the thread is configured according to the ASME B16.5 specification. The thread depth is in line with the VIII Chapter 1 of the VIII Section 1 of the American Mechanical Engineer Association (ASME). UG-43 (g), the design temperature does not exceed 650 ° F, the mother material stress is 17,500 PSI (G), and the thread stress is 25,000 PSI (g). All other materials that exceed these stress should check whether the UG-43 meets the requirements.

Inner diameter: The inner diameter size displayed above is standard. Other sizes can be provided as required.