|
[China]
Trade Verify
Address: B615, Future Fortune Building, No. 1 Wangxi Road, Zhangjiagang City, Jiangsu Province
Contact name:Kara Liu
BLOOM(suzhou) Materials Co.,Ltd |
|
Verified Suppliers
|
|
|
F60 bar
Product Name | Super Duplex 2205 (F60) Stainless Steel Bright Bar |
| Material | Duplex 2205 (F60) |
| Length | standard 5.8 meters-6 meters each piece of the bar or according to buyers' request |
| Surface | Bright,Black,Polished,Peeled |
| Packaging Details | plastic package to prevent water or plywood case to strengthen package. Also can be packed as clients' requirements. |
| Delivery | 15-20 days |
| Diameter | 3-500mm |
| Sample | Available, 1-5 days after receiving payment |
stainless steel :
Grade:ASTM/AISI 304, 304L, 201, 202, 316L, 316, 321, 301,304LN, 304H, 309, 309H, 309S,
310, 310S, 316LN, 316Ti,317, 317L, 321H, 347,347H, 409, 409L, 904, 904L, 2205 ,430
Chemical Composition
| C: | ≤0.03 | Mn: | ≤2.0 |
| Si: | ≤0.75 | Fe: | 62.0 – 69.0 |
| Ni: | 10.0~14.0 | P: | ≤0.045 |
| S: | ≤0.03 | N: | ≤0.1 |
| Mo: | 2.0~3.0 | Cr: | 16.0~18.0 |
Physical property:
| Strength of extension : | σb (MPa)≥620 |
| Offset yield strength: | σ0.2 (MPa)≥205 |
| Elongation: | δ5 (%)≥30 |
| Reduction of area: | ψ (%)≥40 |
| Density: | 7.98 g/cm3, |
Common steel delivery status
1) Cold rolling
u The advantages of cold rolling are good dimensional accuracy ,surface quality ,low surface roughness ,high mechanical properties.
u The steel surface of the cold-rolled (forging) state delivery has oxide skin coverage and there is a great internal stress, so likely to suffer corrosion or rust,.Therefore , its packaging and storage have relatively strict standards
2) Hot rolling
u Hot rolling (forging) steel plate’s termination of a temperature is 800-900 degrees Celsius, then generally natural air cooling.
u Hot-rolled steel state because of the surface is covered with a layer of oxide scale,so having some corrosion resistance, less stringent storage and transport requirements, unlike steel cold-rolled state delivery.
| Surface finish | Characteristics and application |
| No.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
| No.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
| NO.1 | Hot rolled, annealing, pickling. Usually used to cold rolled material, pot for industry, device for the chemical industry and so on. |
