Active Member
|
[China]
Address: 2-627, XIANGJIANG NORTH ROAD, NEW DISTRICT WUXI CITY, CHINA .214028
Contact name:Ivan Zhao
WUXI Hai Roll Fone Science&Technology Co.,Ltd |
|
|
3Ply Automatic Face Mask Making Machine
Product Description
1. High stability, low failure rate, beautiful and firm without rust;
2. Computer PLC programming control, servo drive, high degree of automation;
3. Photoelectric testing of raw materials to avoid mistakes and reduce waste.
Product parameters
Dimension |
7850mm(L) X3600mm(W) X2000mm(H) |
Color | warm grey + silver white
International standard warm grey 1C |
Weight |
≤5000kg, ground weight capacity ≤500kg/m2 |
Working power |
equipment 220VAC±5%； 50HZ；rated power 12KW |
Working air pressure |
Compressed air pressure 0.5-0.8MPa; compressed air flux 300L/min |
Production efficiency |
100-110PPM(based on 20 hours each day, daily capacity about 120,000-140,000 pieces) |
Qualification ratio |
99%(excluding unqualified incoming materials, improper operation by employees) |
Equip failure ratio |
≤2%(equipment failure itself) |
Operating environment |
Temperature 10 一 35℃; humidity: 5-35%HR No flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade) |
Product process
Details diaplay
FAQ
1. Does one machine can only produce one size?
Not exactly, it depends on the machine.
2. Do you have after-sales support?
Yes, we are happy to give advice and also have skilled technicians
available to maintain the machine if needed.
3. How to visit your company?
We can pick you up from Shanghai or Hangzhou airport. Or railway
station Shaoxing North. 4. What can you do if the machine is
broken?
Our machine's warranty period is 12months. if the broken parts
can't repair, we can send the new parts to replace the broken
parts, but you need to pay the express cost by yourself. if after
the warranty period, we can through negotiation for solving the
problems, and we supply the technical support for the whole life of
the equipment.
5.Can you be responsible for transport?
Yes, please tell us the destination port or address. we have rich
experience in transport. 6. 6.You are a trade company or factory?
We are a Manufacturer.
7. Why your price is higher than others?
As we persist on that each factory should put quality in the first
place. We spend time and money on developing how to make machines
much more automatic, accurate, and high quality. We can make sure
that our machine could use more than 20 years without any problem.
8. Do you have overseas engineers?
Yes, we not only provide overseas engineers but also provide
technical training.
9.Do you provide customized?
Sure, we can design the equipment according to the data of the
structural section you provide. We are a professional sheet metal
forming machine designer and manufacturer.
