WUXI Hai Roll Fone Science&Technology Co.,Ltd |
|
KN95 Non Woven Mask Making Machine / Anti Dust Surgical Mask Making Machine
Non Woven Mask Making Machine Introduction
This machine uses ultrasounic to produce finished folding masks automatically. Including special optional function (Anti fog film welding and sponge nose wire welding, pringting) nose wire feeding, earloop welding, folding, forming and cutting, waste collected, the mask produce can be finished just in one machine. It only requires one worker to operate.
Non Woven Mask Making Machine Raw Material
Anti-filter meltdown cloth:
Gram weight: ≥20g/ m²(≥22g/ m² is advised)
Filter efficiency: KN90,KN95, KN100 or BFE95/BFE 99 standard(Medical use)
Coil:ID40- 85mm, OD 600mm, Max. OD 700mm,Width175mm.
Nonwoven:
Mask inner & outer material
Gram weight: 25-30g/ m²,
Color: blue and white.
Coil:ID 40- 85mm, OD 600m,Max. OD 700mm,
Blue color width 175mm, white color width195mm
Earloop:
Elastic nonwoven
Thread diameter: 2.5-3.5mm (hollow), ultrasonic welding to mask available
Plastic aluminum nose strip:
Single core3. 0* 0. 5mm.
Automatically seamed into the mask.
Coil:ID>152mm, OD≤450mm, Height<72mm.
Non Woven Mask Making Machine parameters
Dimension | 7850mm(L) X3600mm(W) X2000mm(H) |
Color | warm grey + silver white |
International standard warm grey 1C | |
Weight | ≤5000kg, ground weight capacity ≤500kg/m2 |
Working power | equipment 220VAC±5%; 50HZ;rated power 12KW |
Working air pressure | Compressed air pressure 0.5-0.8MPa; compressed air flux 300L/min |
Production efficiency | 100-110PPM(based on 20 hours each day, daily capacity about |
120,000-140,000 pieces) | |
Qualification ratio | 99%(excluding unqualified incoming materials, improper operation by |
employees) | |
Equip failure ratio | ≤2%(equipment failure itself) |
Operating environment | Temperature 10 一 35℃; humidity: 5-35%HR |
No flammable, corrosive gas, no dust (cleanliness no less than 100,000grade) |
Ambience:
Temperature: 10- 35°C ;
Humidity: 5-35%HR;
No flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade)
Max. permissible dustiness, unit/m² | Max. permissible microbes | |||
Cleanliness level | ≥0.5 um | ≥5 um | Sediment bacteria | Floating bacteria |
unit/vessel | unit/m3 | |||
100 grade | 3,500 | 0 | 1 | 5 |
10,000 grade | 350,000 | 2,000 | 3 | 100 |
100,000 grade | 3,500,000 | 20,000 | 10 | 500 |
300,000 grade | 10,500,000 | ≤60,000 | 15 | |
Power requirement
Working power:220VAC 土 5%, 50HZ.
Rated power:12KW(excluding air compressor power).
Working air pressure: pressure 0.5-0.8MPa, flux 300L/min