Guangzhou Tendars Tent Co., Limited |
Verified Suppliers
|
|
Product Name | Event Tent | OEM | Accept |
Material | Aluminum + PVC | Place Of Product | China |
Size | Customizable | Feature | Easy To Build |
4.6.1 The quality of lighting appliances and equipment shall comply
with the provisions of relevant national standards, and insulation
shall not be used
Worn or broken utensils and equipment.
4.6.2 High efficiency and energy saving lighting sources and lamps
and their accessory devices shall be used. Distance between
ordinary lamps and flammable objects
The distance from the lamp should not be less than 300mm, the
distance between the high-heat lamp and the flammable material
should not be less than 500mm, and no direct irradiation
Combustibles. Insulation measures should be taken if the specified
safe distance is not reached. Indoor 220V lamps should not be lower
from the ground
At 2.5m.
4.6.3 The temporary occupancy of large space shall be controlled by
partitions and groups according to the use conditions and natural
lighting conditions
And take control measures to dimmer or reduce illumination as
needed.
4.6.4 The quality and performance coefficient of the ventilation
and air conditioning system shall meet the relevant national
standards, and the energy efficiency ratio shall reach
Energy saving standards.
5.1 A general regulation
5.1.1 The tent shall be manufactured by a professional
manufacturer.
5.1.2 Raw materials and components used in tent production shall be
inspected and tested according to batch to ensure tent components
To reach the specified quality level, the welding quality of
critical safety components should be all non-destructive tests
(NDT) technology to conduct inspection and issue inspection report.
5.1.3 The production of structural members shall comply with the
requirements of the design drawings, and the design must be
obtained when the design needs to be modified
Personnel agree and sign the design change document. Before the
production of structural members, the processing technology
documents should be prepared and formulated
Reasonable process flow and establish quality assurance system.
5.1.4 The varieties, specifications and properties of the profiles,
connecting materials and coating materials used in the components
shall meet the requirements
Take into account current national product standard requirements.
5.2 Welding of steel and aluminum structures
5.2.1 The product shall meet the requirements of relevant
standards.
5.2.2 The welding operator must have a welding operation
certificate.
5.2.3 The welding strength shall not be lower than the base
material strength.
5.3 Membrane connection
5.3.1 The membrane can be connected by mechanical means (joint,
elastic rope, hook, zipper, suture, etc.) and chemical
Science - Physical method (welding, bonding) or mixed method.
5.3.2 The quality of the materials used and the finished products
shall meet the design requirements and be inspected and confirmed.
5.3.3 Connections made by sewing, welding and bonding, as well as
zippers, must be torn to their limits
Shear performance is tested. Ageing and environmental impacts
should also be considered.
5.4 Installation and operation procedures are explained
5.4.1 After the product is finished, the factory qualification
certificate and the installation and use procedure manual shall be
provided.
5.4.2 The instructions for installation and use shall include the
following information:
(1) Tent model, main size, main design performance;
(2) Tent installation operation and possible different installation
methods;
(3) Use precautions