SZG Series Conical Vacuum Dryer
Brief introduction:SZG Series Conical Vacuum Dryer is a new generation drying device
developed by our factory on the basis of combining the technology
of similar equipment. It has two connecting ways, i.e. belt or
chain. Therefore it is stable in operation.
Descriptions:
SZG Series Conical Vacuum Dryer is a new generation drying device
developed by our factory on the basis of combining the technology
of similar equipment. It has two connecting ways, i.e. belt or
chain. Therefore it is stable in operation. The special design
guarantees two shafts realize good concentricity. Heat medium and
vacuum system all adapt reliable rotating connector with the
technology from USA. On this basis, we also developed SZG-A. It can
carry out steeples speed change and constant temperature control.
As a specialized factory in drying industry, we supply hundred sets
to the customers every year. As for working medium, it may be
thermal oil or steam or hot water. For drying the adhesive raw
material, we have designed specially a stirring plate buffer for
you.Principle:● Let heat source (for example, low pressure steam or thermal
conduct oil) pass through the sealed jacket. The heat will be
transmitted to raw material to be dried through inner shell;
● Under driving of power, the tank is rotated slowly and the raw
material inside it is mixed continuously.The purpose of reinforced
drying can e realizd;
● The raw material exists is under vacuum. The drop of team
pressure makes the moisture (solvent) at the surface of raw
material become saturation and will evaporate. The solvent will be
discharged through vacuum pump an recovered in time. The inner
moisture (solvent) of raw material will infiltrate, evaporate and
discharge continuously. The three processes are carried out
unceasingly and the purpose of drying can be realized within a
short time.Features:● When oil is used to heat, use automatic constant temperature
control. It can be used for drying biology products and mine. Its
temperature of operation can be adjusted form 20-160 ℃ .
● Compared to ordinal dryer, its heat efficiency will be 2 times
higher.
● The heat is indirect. So the raw material can not be polluted. It
is in conformity with the requirement of GMP. It is easy in washing
and maintenance.Applications:It is suitable for the raw materials that need to concentrate,
mixed and dried at low temperature (for example, biochemistry)
products in chemical, pharmaceutical and foodstuff industries.
Particularly it is suitable for the raw materials that are easy to
be oxidized, volatilized and have night heat sensitivity and is
toxic and not permitted to destroy its crystal in drying process. 
