1)Material :Natural rubber+dipped tyre-cord fabric(enhanced type)
2)Anti-ageing rubber formula ,rubber content more than 57%;the life
span is longer than other docking rubber airbags
3)Inflatable,can deflate packaging, convenient for shipping;
4)The valve/lug on both side are all anti-corrosion, not easy to
rust
5)Improved air valve,high performance air tight
6)Thicken outer rubber layer ,not easy to damage
The process of ship launching by airbags
1.Preparing for launching ramp way and all needed equipments.
Select and check suitable docking rubber airbag size and quantity
for boat, tide up the launching ramp way, fix the ship by winch and
anchors.
2.Taking out all support blocks under stern and middle one by one,
and put in airbags.
3.Taking out all support blocks under the prow. Open winch and
release the cable, let the ship launch to water.
4.Checking all the deckhouse after launching, retrieving all air
bags at meantime.
Attentions during docking rubber airbag use for ship launching
1.Docking rubber airbags must be checked if the pressure is normal
before used.
2.The working pressure of docking rubber airbag when used should
compare the data in the bearing pressure capacity from mustn't use
excessive pressure.
3.It must clean the sharp and protrude hard objects on the ground
which could touch with the rubber airbag body before the rubber
airbag being used, in case it punchures the surface of the airbag.
4.The distance of the docking rubber airbags under the vessel
should no less than 1.5m, the distance after compression should at
least 0.8m, in case it occurs the rubber airbag overlapping
phenomenon when the boat launching.
Product name | Docking rubber airbag |
Diameter range | 0.6-2.8m |
Effective length range | 5-24m |
Layers | 3-10 layers |
Different layers of docking rubber airbag