Leyon steel Co., Ltd |
|
1/2 Male Female Elbow Galvanized Malleable Iron Pipe Fittings
High heat value natural gas annealing furnace is used for
production, we control the annealing process strictly, the elbow’s
physical properties is improved.
The close-grained, high strength, impeccable steel & plate
scrap is used as the raw material, the reson is that the quality of
the steel is always the starting point of excllent quality.
Accurate threads are processed that comply with the precise
standards, such as ASME, EU, BS, DIN, etc. The threads have an
accurate structure, so the thread length and straightness to allow
them to easily engage threaded pipe.
The Correlation table
Size | Inch | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 11/4 | 11/2 |
mm | 6 | 8 | 10 | 15 | 20 | 25 | 32 | 40 | |
Dim. (mm) | A | 19 | 21 | 25 | 28 | 33 | 38 | 45 | 50 |
Size | Inch | 2 | 21/2 | 3 | 4 | 5 | 6 | ||
mm | 50 | 65 | 80 | 100 | 125 | 150 | |||
Dim. (mm) | A | 50 | 69 | 78 | 96 | 115 | 1301 |
Size | Inch | 3/8X1/4 | 1/2x1/4 | 1/2x3/8 | 3/4x3/8 | 3/4x1/2 |
mm | 10X8 | 15X8 | 15X10 | 20X10 | 20X15 | |
Dim. (mm) | A | 23 | 26 | 26 | 28 | 30 |
B | 23 | 26 | 26 | 28 | 31 | |
Size | Inch | 1x1/2 | 1x3/4 | 11/4x1/2 | 11/4x3/4 | 11/4x1 |
mm | 25X15 | 25X20 | 32X15 | 32X20 | 32x25 | |
Dim. (mm) | A | 32 | 35 | 34 | 36 | 40 |
B | 34 | 36 | 38 | 41 | 42 |
Size | Inch | 11/2X1/2 | 11/2x3/4 | 11/2x1 | 11/2x11/4 | 2x1/2 |
mm | 40X15 | 15X8 | 40X25 | 40X32 | 50X15 | |
Dim. (mm) | A | 36 | 39 | 42 | 46 | 38 |
B | 42 | 44 | 46 | 28 | 48 | |
Size | Inch | 2x3/4 | 2x1 | 2x11/4 | 2x11/2 | 21/2x1 |
mm | 50X20 | 50X25 | 50X32 | 50X40 | 65x25 | |
Dim. (mm) | A | 40 | 44 | 56 | 52 | 56 |
B | 50 | 52 | 58 | 55 | 63 |
Size | Inch | 21/2X11/2 | 3x21/2 | 21/2x2 | 3x11/2 |
mm | 65X40 | 80X65 | 65X50 | 80X40 | |
Dim. (mm) | A | 64 | 82 | 61 | 58 |
B | 69 | 85 | 66 | 72 | |
Size | Inch | 3x2 | 4x21/2 | 4X3 | |
mm | 80X50 | 100X65 | 100X80 | ||
Dim. (mm) | A | 73 | 78 | 84 | |
B | 78 | 90 | 92 |
Last process of Machining packaging storage:
During Machining , we let professional person check the angle and thread size accurately, let special person check after packing .