Rubber Coated Magnets Neodymium Magnet Mount Base With Threaded
Nuts Bolts
Product Parameter
Manufacturer | Anhui Lulang New Material |
Product Name | Magnetic Hooks/Strong Magnetic Hooks |
Magnet Grade | N38-N52 |
Surface Plating | Rubber Plating |
Working Temperature | 80 Degrees Celsius(Can be made up to 200 degrees Celsius
temperature resistance) |
Packaging Method | White Box Packaging/Combination Bag Packaging/Bulk |
Product Specifications
Model | D(mm) | H(mm) | Breakwuay(KG) |
AC22 | 22 | 6.5 | 3.5 |
AC43 | 43 | 6.5 | 8.5 |
AC66 | 66 | 8.5 | 18 |
AC88 | 88 | 8.5 | 42 |
Product Feature
1. Quality assurance: rubber coated magnets are mainly made of
Ndfeb magnets, A3 steel and rubber layer, which is not easy to fall
off from the metal surface, not easy to scratch or break,
waterproof and lightweight, long-term service for you.
2. Good performance: The magnet can be installed on the metal
surface that can be connected without drilling, easy to use, and
will not damage the surface of the installation object.
3. Easy to use: Each mounting magnet has an M6 standard internal
threaded stud in the center with washers and nuts, which makes it
easy for you to install camera mounts, car interior and exterior
brackets, motorhomes, factories, outdoor fences, workshops, metal
sheds and other hardware together.
4. Long-term use: These circular magnets are covered with rubber to
improve the bearing capacity of lateral loads; At the same time,
the rubber layer does not allow stains to contaminate the magnets
inside, so it can be safely used outdoors for a long time.
Product Detail
Packing & Delivery
Company Profile