Active Member
|
[China]
Address: Room 9601, Building C, No.6 Xinyuan Road,Jiangyin City, Jiangsu Province, China
Contact name:Peter Xie
JYC technology Co.,Ltd |
|
|
ECPMC For Quick Mold Changing System
Product Introduction
X61 standard electronic controlled permanent magnetic chuck is a new type of magnetic chuck, which use electric pulse to control its magnetism . No electricity is needed when X61 at work, only except in the first 1-2 seconds of magnetization and demagnetization process. Magnetism will not lose even in the case of a sudden power cut, and the work piece will not move. X61 has the convenience of "Electronic controlled magnetic chuck" and the safety precision of "Permanent magnet chuck", which is used for high precision milling and grinding.
| Model | Dimensions (MM) | Polar Distance (MM) | Polar number | Net Weight (KG) | |||
| Length | Breadth | Height | 70*70 | 50*50 | |||
| X61-250*250 | 250 | 250 | 68 | 70*70/50*50 | 4 | 9 | 31 |
| X61-250*300 | 300 | 250 | 6 | 12 | 40 | ||
| X61-300*300 | 300 | 300 | 9 | 16 | 48 | ||
| X61-300*400 | 400 | 300 | 12 | 20 | 64 | ||
| X61-300*500 | 500 | 300 | 15 | 28 | 80 | ||
| X61-300*600 | 600 | 300 | 18 | 32 | 96 | ||
| X61-300*800 | 800 | 300 | 24 | 48 | 128 | ||
| X61-300*1000 | 1000 | 300 | 30 | 60 | 160 | ||
| X61-400*400 | 400 | 400 | 16 | 25 | 85 | ||
| X61-400*500 | 500 | 400 | 20 | 35 | 105 | ||
| X61-400*600 | 600 | 400 | 24 | 40 | 128 | ||
| X61-400*800 | 800 | 400 | 32 | 60 | 170 | ||
| X61-400*1000 | 1000 | 400 | 40 | 75 | 210 | ||
| X61-500*500 | 500 | 500 | 80 | 25 | 49 | 155 | |
| X61-500*600 | 600 | 500 | 30 | 56 | 188 | ||
| X61-500*800 | 800 | 500 | 40 | 84 | 250 | ||
| X61-500*1000 | 1000 | 500 | 50 | 105 | 310 | ||
| X61-600*600 | 600 | 600 | 36 | 72 | 225 | ||
| X61-600*800 | 800 | 600 | 48 | 96 | 300 | ||
| X61-600*1000 | 1000 | 600 | 60 | 120 | 375 | ||
| X61-600*1200 | 1200 | 600 | 72 | 144 | 450 | ||
| X61-600*1500 | 1500 | 600 | 90 | 176 | 560 | ||
Product Details
X61 Powerful Electro Permanent Magnetic Chuck clamping Force Up to More 20 Kg / Cm 2
Save More Than 95% El Ectricity
magnetism Remain 30 Years Even when Power Off
increase Efficiency by More Than 60%
Easy to Use And maintain
Product Accessories
Magnetic Blocks
Use Magnetic Blocks to Machines 6 Sides of the Workpiece at Same Time. Blanks and Irregular
Workpieces Could Be Adjusted to Adapt to Their Roughness by Sliding Up and Down the Elastic Blocks, Toprovide Larger Magnetic Force.
More processing schemes can be provided by using different magnetic
guide blocks pardigm as below
PULSE CONTROLLER
Product introduction:
safety protection: The spindle linkage can be realized by unlocking the input contact signal and themagnetized output contact. lt is equipped with adjustable magnetoelectric current (or short circuit)protection and undercurrent (or circuit break) alarm functions.
Simple operation: all setting parameters and running state can be monitored through the host panel, andthe power frequency can be automatically tracked;Flexible configuration, easy to use.
control interface: it is equipped with a variety of alternative control interfaces, which can satisfy allkinds of on-line control requirements. It also has alternative control (remote) or PLC interfaces.
