Home Companies Dongguan Ming Rui Ceramic Technology Co.,ltd

Customized Fine Alumina Furnace Tube , Diameter 120mm Zirconia Ceramic Tube

Active Member

Contact Us

[China]

Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China

Contact name:Admin deng

Dongguan Ming Rui Ceramic Technology Co.,ltd

Customized Fine Alumina Furnace Tube , Diameter 120mm Zirconia Ceramic Tube

Country/Region	china
City & Province	dongguan guangdong
Categories	Steel Sheets

Product Details

Customized Fine Surface Zirconia Ceramic Pipe Diameter 120mm Ceramic Pipe

Main Features

Specific Gravity or Density: 3.9 g/cm3
Water Absorption or Porosity: 0%
Fusion Temperature or Melting Temperature: 2000 °C or 3632 °F
Maximum Working Temperature: 1800 °C or 2800 °F
Thermal Conductivity: 25 W/m* K
Specific Heat: 0.9 J/g*K
Expansion Coefficient or CTE: 7.5 x 10 E-6 inches/°C
Electrical Resistivity at 20 C: 10 E14 Ohm*cm
Electrical resistance at 600 C: 10 E8 Ohm*cm
Modulus of Elasticity: 44 x 10 E6 p.s.i. or 350 GPa.

Main Features

Name: zirconia ceramic pipe
Brand: Dongguan
Original: China
- High strength&hardness
- High fracture toughness
- Wear resistance
- Electrical insulation
- Low thermal conductivity
- Corrosion resistance in acids and alkalis
- Modulus of elasticity similar to steel
- Coefficient of thermal expansion similar to iron

Abrasion resistant zirconia ceramic tubes/ pipes
Item		Unit	Zirconia
Physical Characteristics	Heat resistance	⁰C	2200
	Bulk density	g/cm³	6.05
	Water absorption	%	0
Mechanical Characteristics	Flexural strength	Mpa	1000
	Hardness vickers	Gpa	89
	Elastic modulus	Gpa	200
	Poisson’s ratio		0.31
Thermal Characteristics	Linear expansion coefficient	(20-500⁰C) 10^-6/⁰C	10
	Thermal conductivity	w/(m.k)	2.5
	Specific Heat	10^-3J/(kgK)	0.5
Electrical Characteristics	Dielectric constant (1MHZ)	-	N.A.
	Dielectric loss angle	*10^-4	N.A.
	Dielectric strength	*10⁶V/m	N.A.
Processing technology
Process range (mm)
Outside Diameter	1---300
Inside Diameter	0.5---300
Length	0.5---600
Accuracy of working (mm)
Perpendicularity	0.001
Concentricity	0.001
Roundness	0.0005
Straightness	0.005
Parallelism	0.01
Planeness	0.005
Roughness	0.005
Fit clearance	0.005

precison ceramic, precision ziconia ceramic, zirconia, ceramic part, ceramic structure, zirconia ceramic shaft sleeve pipe roller tube, zirconia ceramic shaft piston and gear, Zirconia ceramic rod, machinable ceramic rod for industry

Ceramic parts we can produce:

Alumina ceramic, Zirconia ceramic , Ceramic Dowel pin, Zirconia Positioning pin, Insulating ceramic plate

Ceramic adapter plate,Ceramic centering pin,Ceramic connectors,Ceramic spinner,Ceramic roller
Ceramic blade,Ceramic brackets,Ceramic disc,Ceramic insulator,Ceramic rod,ceramic atomizer
ceramic fuse pin,ceramic nozzle,ceramic ferrule,ceramic necklace,ceramic ornament,alumina ceramic plate, ceramic cylinder, ceramic guide, ceramic pin, ceramic bushing, ceramic brick,ceramic injection molding,ceramic bushings,ceramic smoking pipe, ceramic spacer,ceramic piston pump,ceramic part
ceramic heating element vaporizer e cigarette, al2o3 ceramic, ceramic donut atomizer, alumina ceramic disc, alumina ceramic sheet , ceramic alumina , ceramic pressure sensor , ceramic sheet,
ceramic washer, zirconia ceramic plate, ceramic insert, white ceramic ring, ceramic shaft
ceramic pump, ceramic piston, ceramic nail, ceramic insulators, ceramic rod 3mm , ceramic dowel pin
ceramic pin gage , alumina ceramic parts , ceramic burr , ceramic proppant , ceramic needle
ceramic grinder, alumina ceramic rod , alumina ceramic ring, ceramic conical burr , ceramic heater rod
ceramic gear , machinable ceramic, ceramic arms , white ceramic ornaments , sustained high temperature on ceramics

Mingrui offers you a wide range of production facilities like extrusion, injection moulding, pressing and casting. Depending on product geometry and quantities, we will choose the suitable technique for your products.For the final finishing of the parts we use CNC machining centres, equipped with diamond tools in order to meet high accuracies.
Our aim is to offer the ideal solution for any application. Our engineers therefore offer custom solutions that range beyond our existing product portfolio. With our well-equipped industrial development facilities, we produce innovations that can be rapidly commercially exploited.

More Related photos :

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .