Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
Alumina ceramic component
1. It was made of 95%, 99%, 99.5% alumina or zirconia
2. The tightest tolerance is less than 0.05mm.
3. Wear resistant, good toughness,corrosion resistance
Application:
It suitable for sealing material , mechanical system, firing
equipment and refreactory.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical
Industry etc. According to actual application and customer's
requirement, the purities vary from 95%-99.7% and the forming
methods will be different. The forming methods applied in our plant
include dry pressing, isostatic pressing, injection moulding,
extrusion moulding. With experienced engineers and talented
workers, we are confident to offer high quality, high precision,
complex components for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Low Coefficient Of Friction Alumina Ceramic Parts
Welding Equipment. We offer this expertise to all of our customers
to ensure the best design and materials are chosen for their
specific application and needs. Low Coefficient Of Friction Alumina
Ceramic Parts Welding Equipment, Typically, our custom technical
ceramic components and parts we supply are used for one of three
main reasons:
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Low Coefficient Of Friction Alumina Ceramic Parts Welding Equipment
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
Our ceramic products are mainly used in the industrial field of precision ceramic structural parts, ceramic materials using high-strength zirconia (yttrium stable/magnesium stable/cerium Stable), alumina (97/99/99.5/99.7/99.9/99.99) material.
Production and sales of ceramic structural parts are widely used in
instrumentation, food medicine, solar photovoltaic, mechanical
hardware, laser semiconductors, petrochemical, automotive military,
aerospace and other high-end fields.
Mingrui ceramics have been concentrated in the field of ceramic
finishing for many years. We manufacture ceramic precision
components in the performance of a number of institutions and many
customers alike, ceramic precision components of the performance
are significantly better than the peer products.
