Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
Applications of Alumium Oxide Ceramics
- Seal faces
- Valve seats
- Machine components
- High temperature electrical insulators
- High voltage insulators
- Electronic components & substrates
- Ballistic armor
- Roller & Ball bearings
- Wear or corrosion resistant linings
- Semiconductor parts
- Laser cavities
- Tap plates
- Shot blasting nozzles
- Knife sharpeners
- Microwave components
- Frictionless clutches
- Kiln furnitures
Zirconium Oxide Ceramics
Zirconium Oxide (ZrO2 - also known as zirconia) is a material with
very high resistance to crack propagation. Zirconia also has very
high thermal expansion and is therefore often the material of
choice for joining ceramic and steel. Another outstanding property
combination is the very low thermal conductivity and high strength.
Zirconium oxide ceramics are used, among other applications, as
tools for wire forming, as auxiliaries in welding processes, as
insulating rings in thermal processes.
Main Properties of Zirconium Oxide Ceramics
| Item | Unit | Z95 |
| Type | - | Yttria Stabilized |
| Density | g/cm3 | 5.95 |
| Color | - | white |
| Water Absorption | % | 0 |
| Young Modulus | Gpa | 205 |
| Vickers Hardness | Gpa | 12 |
| Compressive Strength | Mpa | 2200 |
| Flexural Strength | Mpa | 900 |
| Thermal Conductivity | W/m.K | 2.20 |
| Thermal Shock Resistance | Δ(°C) | 280 - 350 |
| Max. Working Temp. | °C | 850 |
| Volume Resistivity | Ω ·cm | > 10^12 |
| Dielectric Constant | - | 26 |
| Dielectric Strength | kV/mm | - |
* Tests under room temperature environment;
* The above information is offered for comparison only. Exact
properties will vary depending on the manufacturing method
Typical Applications of Zirconium Oxide Ceramics
- Insulating rings in thermal processes
- Precision shafts and axles in high wear environments
- Wear resistance pads
- Thermocouple protection tubes
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Chemically resistant Industrial Ceramic Parts Oil
Drilling Machines. We offer this expertise to all of our customers
to ensure the best design and materials are chosen for their
specific application and needs. Chemically resistant Industrial
Ceramic Parts Oil Drilling Machines, Typically, our custom
technical ceramic components and parts we supply are used for one
of three main reasons:
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Chemically resistant Industrial Ceramic Parts Oil Drilling Machines
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Chemically resistant Industrial Ceramic Parts Oil Drilling Machines |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Chemically resistant Industrial Ceramic Parts Oil Drilling Machines |
Delivery:
Custom OEM will be shipped within 15 days after determining the
parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the
ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
