Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Ultra-Precise Zirconia Ceramic Plunger Pump With Ceramic Piston Rods
The valveless Ceramic Pump was first patented by Fluid Metering over 55 years ago. Valveless Metering’s pumps, have only one moving part to accomplish both the pumping and valving functions, thereby eliminating the check valves that are present in all other reciprocating (syringe pumps, diaphragm pumps, bellows, piston) designs.
Performance:
| Alumina Content | Unit | 80-85% | 90-96% | > 99.5% | 99% |
| General Application | Lower Cost Electrical & Mechanical | High Strength, Wear Resistant, Electronic, Insulating, Mechanical, Structural & Metalizing | Extremely High Purity, Temperature & Strength; Excellent Corrosion & Wear Resistance | Porous, Easily Degassed & Machinable | |
| Porosity | % | 0-.05 | 0-.05 | 0-.05 | Variable |
| Density | gm/cm3 | 3.45-3.50 | 3.55-3.75 | 3.75-3.95 | 2.4 |
| Flexural Strength | kpsi | 35.0-40.0 | 40.0-50.0 | 50.0-55.0 | - |
| Comprehensive Strength | kpsi | 260.0 | > 300.0 | > 300.0 | - |
| Tensile Strength | kpsi | 15.0-20.0 | 20.0-28.0 | 20.0-28.0 | - |
| Linear Coefficient of Thermal Expansion | (cm/cm/°C) 25-300°C 25-700°C | 5.9X10-6 6.5X10-6 | 6.3X10-6 7.0X10-6 | 6.5X10-6 7.5X10-6 | 6.5X10-67.5X10-6 |
| Dielecctric Constant at 25°C | 1 MH 10 MH | 8.5-8.9 8.4-8.8 | 9.2-9.8 9.0-9.6 | 9.5-9.9 9.3-9.7 | - |
| Dielectric Strength | Volt/mil | 200 | 225 | 225 | - |
| Te Value | °F °C | 1472 800 | > 1832 > 1000 | > 1832 > 1000 | > 1832 > 1000 |
| Thermal Conductivity at 25°C | cal/sec/cm2/cm/°C | .03-.04 | .04-.06 | .07-.08 | - |
| Safe Use Temperature | °F °C | 2550 1400 | 3000-3100 1650-1700 | 3275 1800 | 3275 1800 |
More ceramic liners:
3-30 working days after confirming order,detail delivery date
should be decided according to
production season and order quantity.
We have 92%-99.7% alumina ceramic parts and 95% zirconia ceramic parts.
Dry pressing, isostatic pressing,grouting,hot-chamber die casting,tape-casting,injection moulding, plastic forming,etc.Injection molding and isostatic pressing is most commonly used.
Yttria stabilizer is the most commonly used in our industrial ceramic parts. We also use Magnesium and Cerium stabilizer.
Usually,we can supply existing samples to you freely.Customizied part is needed to pay sample fee.
T/T, L/C, Western Union, Money gram and PayPal is welcome, but PayPal and Western Union only for small-sum payment.
Other related products:
