Active Member
|
[China]
Address: Shajing Road 211-3, Shatou Industrial Park, Shajing Street, Bao'an Distrist, Shenzhen(518104), China
Contact name:William Zhang
Shenzhen Yi Xin Precision Metal And Plastic Ltd |
|
|
Yixin Precision Metal and Plastic Ltd founded in 2004, located in Shajing, Shenzhen, one of China's most important seaports and economic centers. As a professional supplier of CNC machining, we have an average of more than 10 years experienced technical team, it is easy to understand your needs and can quickly provide sample confirmation.
We have factory cooperate with us to maximize production support. Special help to solve OEM and ODM manufacturing precisionand complex aluminum, copper, stainless steel, plastic and other materials CNC machining parts turning, milling, die casting, extrusion, grinding, die, stamping, bending and other low-cost high-quality related programs. We can not only make parts according to your drawings, but can also design according to your conceptual requirements.
Cost Control
1. The most important point, we are the entity factory, not trading company. Price is the composition of the actual product quality price. Quality can guarantee more controllable higher than trading company. The price is lower, at least reducing the trade company's service fee.
2. we consolidate all raw material demand and bought from approved vendor at a mass quantity and right cost with fine quality, Combined with our 15 years of professional CNC machining efficient machining process design experience.
Production
Process Small details make big difference
1. We promise:All the parts from our company have no sh-arp edge. Holes and screw holes are chamfered for convenient assembly (Under no indication). Every product will be carefully packed to prevent the bump and rust in transit.
2. The craftsmanship of all parts we machined is controlled rigorously, Every product has its own process card and process chart.
3. Every operator with much experience and they have to double check program, drawing and SOP and tools before action; Operator have to run FA for qualify before mass production; Operator have to check every measure once one setup done to avoid parts scrap in the end.
4. All staff have been training about cost and quality management.
Our Professional, Your Satisfaction.
1. Our quality inspection procedure is quite strict. it must self-inspected during production, we have flow inspectors and professional inspectors.
2. Each size of product must be tested one to one after completing production and provide quality report.
3. QC Ensure all parts are 100% inspected before shipment
Progress
1. We are a combination of production and trade, industry and trade integration business. So far, there are more than 10 cooperative traders in South Korea, Japan and European and American markets;
2. Because we are more close to our factory, we can understand the actual situation of our factory, we are more professional, more reasonable and more accurate than trade company. So keep you posted on your progress every day.
We not only have the world of high-end five-axis linkage machining center, the five-axis linkage turning compound double spindle machining center, compound turning machine, but also have more than 20 sets of processing machines from Japanese and Taiwanese brands. Our testing equipment are imported from Japanese brand Mitutoyo, such as high-end automatic three coordinate measuring machine, the two coordinate measuring machine, high-quality height gauge and roughness measurement etc.
We stabilize the equipment to ensure your stable product.
Custom made
Welcome Customized Make you want to do what you want to be unique, Put Your Good Ideal into Reality.
Expedited According to customer requirements, flexible and rapid temporary deployment to try to meet, Accept Your Special Demands, Let You Save Time and Worries.
Our Team: Our factory focused on CNC parts processing. We have a modern factory with an average technical team experience of more than 10 years.
Our Equipment: We have a lot of CNC imported from Japan, with 3 axis, 4th draw, 5 axis, and accuracy up to 0.002mm.
| Cost Control | 1. The most important point, we are the entity factory, not trading company. Price is the composition of the actual product quality price. Quality can guarantee more controllable higher than trading company. The price is lower, at least reducing the trade company's service fee. 2. we consolidate all raw material demand and bought from approved vendor at a mass quantity and right cost with fine quality, Combined with our 15 years of professional CNC machining efficient machining process design experience. Join us to reduce your costs
|
Production Process | Small details make big difference 1. We promise:All the parts from our company have no sharp edge. Holes and screw holes are chamfered for convenient assembly (Under no indication). Every product will be carefully packed to prevent the bump and rust in transit. 2. The craftsmanship of all parts we machined is controlled rigorously, Every product has its own process card and process chart. 3. Every operator with much experience and they have to double check program, drawing and SOP and tools before action; Operator have to run FA for qualify before mass production; Operator have to check every measure once one setup done to avoid parts scrap in the end. 4. All staff has been trained in cost and quality management. Our Professional, Your Satisfaction.
|
production Quality | 1. Our quality inspection procedure is quite strict. it must
self-inspected during production, we have flow inspectors and
professional inspectors. 3. QC Ensure all parts are 100% inspected before shipment We control it so you don't have to worry |
Production Progress | 1. We are a combination of production and trade, industry and trade integration business. So far, there are more than 10 cooperative traders in South Korea, Japan and European and American markets; 2. Because we are more close to our factory, we can understand the actual situation of our factory, we are more professional, more reasonable and more accurate than trade company. So keep you posted on your progress every day. Keep you up to date |
| Production Equipment | We not only have the world of high-end five-axis linkage machining center, the five-axis linkage turning compound double spindle machining center, compound turning machine, but also have more than 20 sets of processing machines from Japanese and Taiwanese brands. Our testing equipment are imported from Japanese brand Mitutoyo, such as high-end automatic three coordinate measuring machine, the two coordinate measuring machine, high-quality height gauge and roughness measurement etc. We stabilize the equipment to ensure your stable product. |
| Custom made | Welcome Customized Make you want to do what you want to be unique, Put Your Good Ideal into Reality. |
| Expedited | According to customer requirements, flexible and rapid temporary
deployment to try to meet, Accept Your Special Demands, Let You Save Time and Worries. |
| Material | Aluminum Alloy: Wide Range for Your Selection. |
| Surface Treatment | Blacking, polishing, anodize, chrome plating, zinc plating, nickel plating, tinting According to customers' specific request. Match Your Products. |
| Usage | Medical equipment, electronic equipment, communication equipment, semiconductor equipment, mechanical equipment, automation equipment, new energy, petroleum, automobile, aviation, motorcycle, bicycle, etc |
| Sample Time and Bulk Time | Sample Time Around 3-7Working Days; Bulk Time Around 8-30Working Days. |
| MOQ | 1pcs, Low MOQ to Avoid Unnecessary Waste of Your Products and Money. |
| Payment Term | T/T,Western Union, Cash, others can be negotiated.Only 30% Deposit, Make YourFloating Capital More Effective. |
| Shipping | By Air or Sea. If Choose by Air, it is Faster Like You Purchase from Local Market. |
Yixin Precisoin Ltd provide surface treatment - Electrophoresis
Electrophoresis technology is constantly improving with the increase of industrial demand, electrophoresis treatment can be customized in various colors, maintain the metallic luster and enhance the corrosion resistance of the surface, which has little impact on the accuracy of products. The thickness of one side is about 10-25um, and thicker ones can also be customized.
fine sandblasting parts
knurling parts
CNC engraving parts
powder coating parts
CNC machining parts
bending parts
4-axis CNC machining parts
anodize finished partsMost CNC factories only focus on CNC machining, but are not good at surface treatment. If the surface treatment of parts does not meet expectations, it will not only increase the cost, but also affect the time to market of products.
YMP has rich experience in surface treatment of metal parts, and we will choose suitable surface treatment process according to different parts materials and uses.
The common surface treatments of YMP include: electroplating, electrophoresis, painting, powder spraying, sand blasting, polishing, shot blasting, laser engraving, etching, CD pattern, silk screen printing, wire drawing, blackening, anodizing, hard oxidation, thick film oxidation, micro-arc oxidation and so on. No matter what personalized requirements your parts need, we can meet them.
There are various parts that can be processed by CNC, involving a wide range of industries.
YMP has many years of experience in making OEM parts, and there are 475 kinds of materials. Basically, we can process all the metal materials in the market, and we are equipped with spectrometers to ensure the authenticity of the materials. So you don't have to worry about material problems when you choose YMP. We have stocks of aluminum alloy, stainless steel, magnesium alloy, titanium alloy, zinc alloy, nickel alloy, copper, steel, and so on.
